Opinions on salvage parts - diyAudio
Go Back   Home > Forums > Design & Build > Parts

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th September 2005, 01:34 PM   #1
diyAudio Member
 
Join Date: Sep 2005
Default Opinions on salvage parts

Ok , just wanting to see what the general opinions are here of using salvaged parts in projects .Examples might be , heatsinks , power supplys or internal parts of such , caps , switches so on and so forth .The reason I ask is I've been offered the opportunity to salvage whatever I can or want to from about 4 or 5 pallett loads of used computers , printers ,tvs , vcrs , overhead projectors , backup power supplys ,etc. So wanted to see what if anything would be worth the time to remove to either use or that would have a resell value to help support this diy hobby. Just thought this section of the list might be the place to ask with the "what are and where to get and how to make "
header.
Tim
might be on my way to prove wrong the theory that the only dumb questions are those that are never asked.
  Reply With Quote
Old 16th September 2005, 01:36 PM   #2
dnsey is offline dnsey  United Kingdom
diyAudio Member
 
Join Date: Mar 2004
Location: Shropshire, England
Depends on how much storage space you have
I usually take the lot and stockpile it, as I never know what might come in useful, but I do have trouble shutting the door of that building
  Reply With Quote
Old 16th September 2005, 01:48 PM   #3
Magura is offline Magura  Denmark
diyAudio Member
 
Magura's Avatar
 
Join Date: Oct 2003
Location: Denmark, Viborg
Backup PSU's usually cosists of some nice big caps of good quality. Besides that you may find big film caps and a load of mosfets. To salvage active devices could be argued, as they may be damaged in some way, but caps are expensive and easy to check.

Magura
__________________
Everything is possible....to do the impossible just takes a little while longer.
www.class-a-labs.com
  Reply With Quote
Old 16th September 2005, 01:54 PM   #4
diyAudio Member
 
Join Date: Sep 2005
The bad thing is I have to take out what I want / need not the whole lot or whole item .In other words I can take out any part of say a computer , power supply whatever just as long as the computer shell with serial # and such are left to be sent to the recycling center to be disposed of properly *enviromental regulations* gotta be able to show that with things like monitors the crts were not just tossed in a dump, but can pull anything out of it except the crt , pulled 2 caps out of 1 to use to replace a bad ones in a guitar amp.Thats why I'm asking for specific parts that would be worth saving .
  Reply With Quote
Old 17th September 2005, 12:41 AM   #5
BWRX is offline BWRX  United States
diyAudio Moderator Emeritus
 
Join Date: Jan 2005
Location: Pennsylvania
they can be a real pain to remove or get to, but i collect the heatsinks, silpads, and toroidal transformer cores from old psu power supplies. there are also a bunch of transformers, inductors, and large caps in backup psu's. of course the electronics parts vary... it's usually not worth it (time and effort wise) to desolder resistors and diodes.
  Reply With Quote
Old 17th September 2005, 07:17 AM   #6
ghudnub is offline ghudnub  United States
diyAudio Member
 
ghudnub's Avatar
 
Join Date: Sep 2005
Sounds like a bonanza to me.

I bought about 20 Jensen amps (boards only) a couple years ago for less than $5 each. Each board contains a pair of IRFZ40's, 10 IRF540's, a positive and a negative 15 volt regulator, a SMPS toroid, filter, RCA's, caps.

In short, each amp has saved me a bunch of cash over new parts. I build Rockford Fosgate Power 300's as a hobby, and these boards supply a ton of the high dollar parts for next to nothing.
  Reply With Quote
Old 17th September 2005, 02:06 PM   #7
mzzj is offline mzzj  Finland
diyAudio Member
 
Join Date: Jul 2005
Location: 65N 25E
Generally i look only for toroidal transformers , heatsinks and big filter caps as these can be a major part of expenses building something(amps). And they are very universal use I also keep all nice housings and cases, especially modular 19" rack stuff.
Then i also rip boards that have plenty of similar components, ie 10pcs identical AT supplies so i rip ferrites and iron toroids from them+ IEC power connectors. Easier when i have plenty of identical parts so that i can put them in AL=500 box and dont need to measure every iron toroid separately.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Salvage value? Mark2727 Class D 9 13th April 2009 05:32 PM
Opinions On Parts Express Usher 701 Kit? JimOfOakCreek Multi-Way 2 19th February 2008 08:49 PM
Parts from Salvage jkeny Tubes / Valves 58 1st October 2007 03:10 PM
Parts Salvage jkeny Digital Source 2 21st April 2006 04:10 PM
Help salvage my old reciever? xstephanx Everything Else 7 25th March 2005 01:08 AM


New To Site? Need Help?

All times are GMT. The time now is 10:20 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2