T500H 250 Volt Fuse
I own a Behringer mixer Eurorack UB2442FX-PRO and I want to change one of the fuses of which reads: T500H 250V. This is a 20mm fuse. Is this a 1/2 Amp or 5 - Amp fuse. Any help would be appreciated.
Assuming you are aiming at the mains fuse, that would be 500mA or 1/2A.
However, looking at the specs sheet at http://www.behringer.com/UB2442FX/index.cfm?lang=ENG they recommend 1.6AT.
Or the fuse you have taken out is not the original one or the specs have been updated during production time or someone made a mistake somewhere.
If the fuse blew due to a fault condition, definitely try 500mAT.
If it still blows, get the soldering iron. :cool:
I agree with you about the 1.6 of which I have already changed but there is another inside the console of which I'd like to replace and this is the one I'm unsure of. If you say 1/2 A, then I'll give this a go.
any idea what the H in T500H 250V means?
|All times are GMT. The time now is 05:45 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio