diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Parts (http://www.diyaudio.com/forums/parts/)
-   -   Adcom GFA-585 Parts Needed (http://www.diyaudio.com/forums/parts/60779-adcom-gfa-585-parts-needed.html)

wilsonmw 14th July 2005 05:15 PM

Adcom GFA-585 Parts Needed
 
I have a Adcom GFA 585 Limited Edition with a bad PCB. I spoke to Adcom and the part isn't available any longer.

Maybe somewhere out there, someone has a parter and call sell me the boards.

Short of that, maybe I'll sell mine for parts. Any ideas what one of these would be worth?

So, if anyone has access to some parts for one of these, let me know.

Thanks.

Stuart Easson 14th July 2005 05:29 PM

driver board from 565
 
Hi,

I am not completely certain, but I think each of the amps in a the 585 are the same as the monoblock 565. If that is the case I have a single, non-functional board from a recently parted out 565. The PCB itself is perfect, but it has an undiagnosed fault. I also have the service manual and ~40 original, tested pairs of the Toshiba output transistors, all removed from Adcom amps.

Stuart

wilsonmw 14th July 2005 06:09 PM

Thanks for responding. I'll call the Adcom guru at the company and ask them about the board you mentioned.

If they give the green light, let's work out a deal !

Thanks again.

Mike


All times are GMT. The time now is 11:47 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2