Local PCB manufacturers?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi,
I am trying a small project that has a ready Eagle schematic. I need to find a nice, but not too expensive for student place to print a pcb. Preferably Toronto area, but if shipping is involved in any way, Canadian manufacturers will be fine. Somewhere, where you would order youself.
The board is quite small, about 3x4 inches

Also, I am not too familiar with places to buy parts in Toronto area (maybe even Etobicoke or DT Toronto). I know several stores, but it would be nice if you have some suggestions/links where I can order stuff. Here are some of the items I would need.

I've heard of Digikey online store, but that's in usa. How are the shipping charges and other fees to ship to Toronto, if you've bought from them?

CF Ejector
Compact Flash Socket
USB Connector
Audio Jack
PIC Microcontroller (18F452)
MP3 Decoder Chip (STA013 from STMicro)
Push Switches
Volume Switch
Switches
1206 caps and resistors
Schottky Diode SMB
Bead
trimpot


Thanks for the help!
 
Canadian PCB makers

AP Circuits in Calgary is cheap, fast and good. Mind you, cheap is in the mind of the beholder but their P1 service is excellent. They have automated on line ordering and you can get a price quote to the penny of theor web site with no hassle, including shiping.

http://www.apcircuits.com/

They also ship to the USA with no hassle. I have used them many times and have never failed to be totally satisfied with the boards Now if my circuits I build on the boards worked so well.
 
You can try www.pcbexpress.ca
I've not used them but their peices seem ok.

As for places to buy parts, both Digi-key and Newark InOne have flat rate $8.00 cdn shipping. There is also Electro-Sonic in TO, there prices are better, but shipping is $10.00
One note though when ordering from DK or Newark, make sure your on the Canadian website or the order won't got through.

http://www.digikey.ca
http://canada.newark.com/
www.e-sonic.com
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.