Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

how to wire a rocker switch
how to wire a rocker switch
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 3rd January 2005, 08:26 AM   #1
Diy_Ambitious is offline Diy_Ambitious  New Zealand
diyAudio Member
Diy_Ambitious's Avatar
Join Date: Sep 2004
Location: NZ
Default how to wire a rocker switch

I've got this 10A 250VAC rocker switch that lights up and theres 3 terminals marked 1,2 and 3. Is this how to wire it ?

1) will be 240VAC in.
2) 240VAC output.
3) Ground , so does it go to safety earth ?

does it matter if its LIVE or NEUTRAL for the AC in ?

  Reply With Quote
Old 3rd January 2005, 10:07 AM   #2
Centauri is offline Centauri  Australia
diyAudio Member
Join Date: Jul 2003
Location: Newcastle, Australia
DON'T connect any of the pins to ground - ground (earth) is for safety and sheilding, NOT return current.

First you will have to identify the terminals - numbering is at the discretion of the manufacturer. With a multimeter measuring ohms, take readings between each of the switch pins with the switch in both on and off positions. You will find that there is an effective open circuit (no reading) on one pin - this is the internal neon connection. Connect this to mains NEUTRAL.

Connect mains ACTIVE to one of the other pins - if the light goes on and off when you activate the switch, it is the correct pin. If the light stays on all the time, change active to the other pin.

The remaining pin is now your mains out. Switches should always be connected in line with mains ACTIVE.

When doing anything with mains voltages, BE CAREFUL - 240V isn't very forgiving....

  Reply With Quote


how to wire a rocker switchHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
what source selector rotary switch and how to wire it bemoth Parts 29 1st February 2008 01:31 PM
rocker ratso Parts 0 6th June 2007 04:27 AM
Rocker Switch HELP danielduaine Parts 1 10th April 2007 11:58 PM
How to wire a 3 terminal rocker switch ? Stormo Parts 1 28th November 2003 08:20 AM

New To Site? Need Help?

All times are GMT. The time now is 08:10 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio