question about Linkwitz transform

[shaunly]

What logic gate do I use to built this circuit. I'm thinking it's an OR gate, but I could be wrong. Here's a picture of the circuit.

[shaunly]

also, where can I find this chip. Just in can here's a better picture

[shaunly]

haha..Im so dumb, I just answer my own question. It's an TL071.
Another question: What goes into the +VCC and -VCC of the chip. Is it like a 12DC or do I even need to hook it up. Here's a picture

[Aunkst]

Wow.
Read the datasheet.

[shaunly]

Originally posted by Aunkst
Wow.
Read the datasheet.

[cocolino]

Originally posted by Aunkst
Wow.
Read the datasheet.


Originally posted by shaunly

Hi shaunly,

just search "google" for "TL071-Datasheet"

Aunkst is right : read it - and things should become much clearer after it.

Also search "google" for the term "OP-AMP basics" or similar terms
- You`ll get plenty to read.

For information regarding the Linkwitz transform circuit in general, Your best bet is to go where it comes from :
http://www.linkwitzlab.com/filters.htm#9

On this site You`ll also find a lot of info about how to implement Op-Amps (Operational Amplifier) as the TL-071 is one.

This should take You busy reading for a while

[shaunly]

Originally posted by cocolino



Hi shaunly,

just search "google" for "TL071-Datasheet"

Aunkst is right : read it - and things should become much clearer after it.

Also search "google" for the term "OP-AMP basics" or similar terms
- You`ll get plenty to read.

For information regarding the Linkwitz transform circuit in general, Your best bet is to go where it comes from :
http://www.linkwitzlab.com/filters.htm#9

On this site You`ll also find a lot of info about how to implement Op-Amps (Operational Amplifier) as the TL-071 is one.

This should take You busy reading for a while

Thanks for your help, I'll start reading now.