2SJ81 & 2sK255 help identify

AndrewT · 20th October 2004, 07:56 PM

I have a Sugden P128 monoblock power amp.
The output pair are 2 off each 2sj81 Pch and 2sk255 Nch. They are flat pack 2 bolt fixing.
I cannot find any data. Can anyone point me to a site?
ps. the reason I ask is; my other pair have had the mosfets replaced, before I bought them, with 2sj200 and 2sk1529 & I cannot adjust the Iq high enough with the result they run cold @ about 16mA.
Andrew T.

Netlist · 20th October 2004, 08:08 PM

Here is something:

2SJ81: V-MOS, 120V, 7A, 100W, <1,7ohm,230/110ns
2SK225: V-MOS, 120V, 7A, 100W, <1,7ohm,180/60ns

/Hugo

PMik · 20th October 2004, 09:42 PM

Use 2SJ162/2SK1058 as close an eqv. for 2SJ81/82/83 and 2SK225/226/227 you can get.
but comes in TO-3P Housing, so you have to drill some new holes

http://www1.jaycar.com.au/images_uploaded/3termdev.pdf

AndrewT · 21st October 2004, 06:16 PM

Hi all,
thanks for comments so far.
I am surprised that 2sj81 is rated at 120v 7a 100w.
the amp is running on +71v & -71v power rails and +-80.5v driver rails. I think it is designed to produce about 180w- 200w into 8r.
Two of those mosfets in parallel would seem under designed. Maybe that's why the other amp has been repaired.
The partners are 2sk255 NOT as replies earlier.
Does this mean they are not true pairs?

Netlist · 21st October 2004, 06:48 PM

Hi Andrew,
There's no 2SK255 in my book(s).
The 2SK225 is definitely the complementary type.
Have attached some more info on the 2SJ81.

The 2Sk200 and 2SJ1529 are pairs.
2SJ200: V-MOS, NF-E, 180V, 10A, 120W
2SK1529: V-MOS, NF-E, 180V, 10A, 120W

You can find datasheets with google for these.

/Hugo

AndrewT · 24th October 2004, 09:55 PM

Thanks all,
Netlist, reading your data page (a bit small but I just managed) I could compare 2sj81 with 2sj162 & found their Vgs is between 0.45v and 1.45v. BUT 2sj200 has a Vgs range of 0.8v to 2.8v. This explains why I cannot adjust Iq upto a sensible value.
My choice now is to swap the SJ200/k1529 for the new alternative or change the resistive bias pot to a Vbe multiplier connected to the output heatsink. Seems simple now.
Thanks again
Andrew T.

20th October 2004, 07:56 PM	#1
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	2SJ81 & 2sK255 help identify I have a Sugden P128 monoblock power amp. The output pair are 2 off each 2sj81 Pch and 2sk255 Nch. They are flat pack 2 bolt fixing. I cannot find any data. Can anyone point me to a site? ps. the reason I ask is; my other pair have had the mosfets replaced, before I bought them, with 2sj200 and 2sk1529 & I cannot adjust the Iq high enough with the result they run cold @ about 16mA. Andrew T.

20th October 2004, 09:42 PM	#3
PMik diyAudio Member Join Date: Mar 2004 Location: Fort Lauderdale, FL	Use 2SJ162/2SK1058 as close an eqv. for 2SJ81/82/83 and 2SK225/226/227 you can get. but comes in TO-3P Housing, so you have to drill some new holes http://www1.jaycar.com.au/images_uploaded/3termdev.pdf __________________ Mod is fun

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEED 2SK225 & 2SJ81 FETs for Sugden amp! Help!	milosz	Parts	5	23rd May 2008 09:59 PM
Please help identify this amp	kijana	Everything Else	5	13th November 2006 09:53 PM
Help me identify this?	peace brainerd	Solid State	11	3rd August 2006 05:22 PM
Please help me identify this	Lloyd1986	Subwoofers	5	26th January 2005 09:48 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th October 2004, 08:08 PM	#2
Netlist diyAudio Moderator Emeritus Join Date: Jan 2003	Here is something: 2SJ81: V-MOS, 120V, 7A, 100W, <1,7ohm,230/110ns 2SK225: V-MOS, 120V, 7A, 100W, <1,7ohm,180/60ns /Hugo

21st October 2004, 06:16 PM	#4
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Hi all, thanks for comments so far. I am surprised that 2sj81 is rated at 120v 7a 100w. the amp is running on +71v & -71v power rails and +-80.5v driver rails. I think it is designed to produce about 180w- 200w into 8r. Two of those mosfets in parallel would seem under designed. Maybe that's why the other amp has been repaired. The partners are 2sk255 NOT as replies earlier. Does this mean they are not true pairs?

24th October 2004, 09:55 PM	#6
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Thanks all, Netlist, reading your data page (a bit small but I just managed) I could compare 2sj81 with 2sj162 & found their Vgs is between 0.45v and 1.45v. BUT 2sj200 has a Vgs range of 0.8v to 2.8v. This explains why I cannot adjust Iq upto a sensible value. My choice now is to swap the SJ200/k1529 for the new alternative or change the resistive bias pot to a Vbe multiplier connected to the output heatsink. Seems simple now. Thanks again Andrew T.