hello, ive been toying with the idea of a relayed passive pre for a while now (finally got fed up with swapping cables round all the time) and wondered what you all think of these relays from Maplin? heres the description:
I'd like to be able to use these as they seem pretty cheap (88p each if over 25 are ordered) but don't know if they'd be good enough....anyone?
Cheers,
Steve
pictureA sealed reedrelay suitable for useat voltages from 3·8V to22V with single-pole make or double-pole make actions. The highresistance coil enablesthe relay to be drivendirectly by 74 seriesICs and most logic buffers. At the same time the relay can switch up to 10VA. Contact Details (per contact) Max current: 1A Max voltage: 100V Max switching power: 10VA Contact resistance: 150m ohms max Operate time: 1ms max including bounce time Release time: 0·5ms max including bounce time Life: >1 million operations at full load
I'd like to be able to use these as they seem pretty cheap (88p each if over 25 are ordered) but don't know if they'd be good enough....anyone?
Cheers,
Steve
Just worked out how to link to the page...
http://www.maplin.co.uk/products/module.asp?CartID=041003134420541&moduleno=2605
http://www.maplin.co.uk/products/module.asp?CartID=041003134420541&moduleno=2605
Nobody got any ideas?
Here's an updated link anyway...
http://www.maplin.co.uk/Module.aspx?ModuleNo=2605&TabID=1&WorldID=3&doy=4m10
Steve
Here's an updated link anyway...
http://www.maplin.co.uk/Module.aspx?ModuleNo=2605&TabID=1&WorldID=3&doy=4m10
Steve
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- Any thoughts on this relay?