timcow said:Just curious if anyone has any ideas as to how to measure or find out an inductor value on my crossovers since there are no printed values ? can anyone help. Hope I posted this in the correct section..if not forgive me..i'm a newbie here.
Use an inductance meter.
Attachments
Tim:
an inductance meter is a good example of "buy" vs "make" -- if you have a Digital Volt Meter Jameco sells a kit for around $7 to measure inductance using the DVM.
the heathkit RLC bridge usually sells for around $20 on EBay. there are good units from B&K, Sencore which are available all the time.
an inductance meter is a good example of "buy" vs "make" -- if you have a Digital Volt Meter Jameco sells a kit for around $7 to measure inductance using the DVM.
the heathkit RLC bridge usually sells for around $20 on EBay. there are good units from B&K, Sencore which are available all the time.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.