|Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|20th July 2004, 03:29 PM||#1|
Join Date: Oct 2003
Repairing Scraped Winding on Toroid
I bought a used toroidal power transformer and received it today. It was in good shape but for one thing.
When the guy packed it, he put the mounting plate on the top without the rubber pad. The edge of the plate up scraping a bit of the insulating tape and, perhaps, a bit of insulation off of one of the windings.
The damage is small, maybe 1/2cm on top of the winding. The wire is secure so probably won't slide around and none of the other windings are exposed.
My question is, how does one repair this? Is there some sort of self-adhesive clear tape (like the tough tape that protects the toriod) that I could stick on, or should I use something like a bit of epoxy?
I could use regular black electrical tape, but the adhesive on that doesn't seem to durable and there must be a more elegant solution.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|toroid winding robot||star882||Parts||1||22nd June 2009 05:08 PM|
|need toroid winding wire for amp6||gychang||Parts||4||31st October 2007 07:16 PM|
|winding multiple secondaries on a toroid???||Puggie||Power Supplies||3||9th August 2006 06:58 PM|
|Repairing Scraped Winding on Toroid||KT||Parts||1||20th July 2004 04:18 PM|
|Start of winding in toroid matters?||ftjandra||Chip Amps||1||1st July 2004 08:13 AM|
|New To Site?||Need Help?|