mixing caps?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
on my phoenix gold amp i've just changed one bank of caps (originally 2200uf 16v) to 35v caps. i havn't changed the good side but would it hurt the amp having higher voltage caps on opposite sides of circuit board?

also, the 47ohm resisters look a bit burnt but are reading correct on the multimetre, are these ok?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.