Knobs Database

A3rd.Zero · 30th April 2004, 05:58 PM

I thought it would be a good idea to post images and sources for knobs that people have found and like. It has been very hard for me to find a knob that I like, and I figure that I am not alone.

Please post an image and source at least. Price would be nice too.
Thanks everyone!

Milo

A3rd.Zero · 30th April 2004, 06:02 PM

Ok Ill start with my favorite DIY knobs.

Arthur Harris Cabinet Hardware pulls.

Stainless steel, avaliable all over the net, you have to drill it out to accept a shaft but its easy, and with a little blue tac on the end of the shaft it doesnt go anywhere.

about $11US

This place sells alot of them.

http://store.yahoo.com/myknobs/arharcusstai1.html

Milo

A3rd.Zero · 30th April 2004, 06:05 PM

Here is another.

Omnia Inudstires Stainless Steel Cabinet Hardware pull.

Avaliable all over the net. These are a little harder to find but I really like them. Same drilling deal as with all Cabinet Hardware Pulls.

about $7US

Omnia's Website
http://www.omniaindustries.com/

These are kinda over the top but might be usefull.

Milo

A3rd.Zero · 30th April 2004, 08:29 PM

http://www.thlaudio.com/indexE.htm

THL audio has a great selection of Knobs at good prices. Everything is in NT$ New Taiwan Dollar, so you need to convert unless you live in Taiwan.

Milo

A3rd.Zero · 1st May 2004, 01:43 AM

Member Illusus makes these super slick custom knobs.

http://www.diyaudio.com/forums/showt...072#post383072

Milo

Sch3mat1c · 1st May 2004, 02:58 AM

Uhm..., I'd post my favorite knob but I'm afraid it's against forum rules!!!

A3rd.Zero · 1st May 2004, 01:24 PM

I didnt think that someone else could copyright YOUR "knob"!

Milo

Variac · 13th October 2004, 05:20 PM

DIY Cable has some now:
http://www.diycable.com/main/product...roducts_id=525

The smaller ones are still pretty large, I like the proportions better, and $8 isn't too bad....

raintalk · 13th October 2004, 07:20 PM

Very handy links!
I thought I'd bump this up in case somebody has any more places for knobs.

Anybody have any pointers to illuminated knobs?

AdThanksVance,

Baumi · 25th October 2004, 02:08 PM

Hi alltogether,
My first reply - and it´s only a Questionjavascript:smilie('

')
roll eyes (sarcastic)

Someone who has an Idea from where I can buy old-fashioned(or newly Produced)bakelit knobs(the ones you can tourn around)
Stefan

30th April 2004, 05:58 PM	#1
A3rd.Zero diyAudio Member Join Date: Nov 2003 Location: Los Angeles	Knobs Database I thought it would be a good idea to post images and sources for knobs that people have found and like. It has been very hard for me to find a knob that I like, and I figure that I am not alone. Please post an image and source at least. Price would be nice too. Thanks everyone! Milo __________________ How did I live without Nina Simone for so long?

30th April 2004, 06:02 PM	#2
A3rd.Zero diyAudio Member Join Date: Nov 2003 Location: Los Angeles	Ok Ill start with my favorite DIY knobs. Arthur Harris Cabinet Hardware pulls. Stainless steel, avaliable all over the net, you have to drill it out to accept a shaft but its easy, and with a little blue tac on the end of the shaft it doesnt go anywhere. about $11US This place sells alot of them. http://store.yahoo.com/myknobs/arharcusstai1.html Milo __________________ How did I live without Nina Simone for so long?

30th April 2004, 06:05 PM	#3
A3rd.Zero diyAudio Member Join Date: Nov 2003 Location: Los Angeles	Here is another. Omnia Inudstires Stainless Steel Cabinet Hardware pull. Avaliable all over the net. These are a little harder to find but I really like them. Same drilling deal as with all Cabinet Hardware Pulls. about $7US Omnia's Website http://www.omniaindustries.com/ These are kinda over the top but might be usefull. Milo __________________ How did I live without Nina Simone for so long?

30th April 2004, 08:29 PM	#4
A3rd.Zero diyAudio Member Join Date: Nov 2003 Location: Los Angeles	http://www.thlaudio.com/indexE.htm THL audio has a great selection of Knobs at good prices. Everything is in NT$ New Taiwan Dollar, so you need to convert unless you live in Taiwan. Milo __________________ How did I live without Nina Simone for so long?

1st May 2004, 01:43 AM	#5
A3rd.Zero diyAudio Member Join Date: Nov 2003 Location: Los Angeles	Member Illusus makes these super slick custom knobs. http://www.diyaudio.com/forums/showt...072#post383072 Milo __________________ How did I live without Nina Simone for so long?


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st May 2004, 02:58 AM	#6
Sch3mat1c diyAudio Member Join Date: Jan 2003 Location: Milwaukee, WI	Uhm..., I'd post my favorite knob but I'm afraid it's against forum rules!!! __________________ See my Electronics webpage -- the home of Vacuum Tube Drag Racing. The key to being a successful Audiophile: "I reject your reality and substitute my own!"

1st May 2004, 01:24 PM	#7
A3rd.Zero diyAudio Member Join Date: Nov 2003 Location: Los Angeles	I didnt think that someone else could copyright YOUR "knob"! Milo __________________ How did I live without Nina Simone for so long?

13th October 2004, 05:20 PM	#8
Variac diyAudio Editor Join Date: Dec 2001 Location: San Francisco, USA	DIY Cable has some now: http://www.diycable.com/main/product...roducts_id=525 The smaller ones are still pretty large, I like the proportions better, and $8 isn't too bad.... __________________ Burning Amp Festival Sunday, October 28th, 2012 in S.F. We need Volunteers & sign-up's for what you're bringing!

13th October 2004, 07:20 PM	#9
raintalk diyAudio Member Join Date: Jul 2004 Location: Seattle USA	Very handy links! I thought I'd bump this up in case somebody has any more places for knobs. Anybody have any pointers to illuminated knobs? AdThanksVance,

25th October 2004, 02:08 PM	#10
Baumi diyAudio Member Join Date: Oct 2004	Hi alltogether, My first reply - and it´s only a Questionjavascript:smilie('') roll eyes (sarcastic) Someone who has an Idea from where I can buy old-fashioned(or newly Produced)bakelit knobs(the ones you can tourn around) Stefan

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Resisitor Database	joka22	Solid State	8	30th November 2008 06:19 PM
Problem with this database	Thawach	Subwoofers	6	27th October 2008 06:35 PM
Project database	michael	Multi-Way	5	27th February 2004 03:55 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read