Hi, my LK1 Linn has the "disco light" issue -intermittent led in the front board, and the unit sometime quits to function. the manual's cure is "C12 on control board faulty Replace C12 – Linn part no: CAP 022". C12 is an old philips 035GV 6u8 63V CAP. As on Ebay i couldn't find it, do you have any idea, or link, or new brand that i could buy to replace it? Thank you!
Radial 6.8 uF 63 VDC Aluminium Electrolytic Capacitors - Leaded | Mouser Denmark
Take your pick, just make sure the dimensions fit the PCB.
Take your pick, just make sure the dimensions fit the PCB.
thanks for the reply, and for the help. This is actually the one i've to change, it has a whitish drop of paint on top, and it's located close to c13; it fits a Linn LK1 pre-amp, probably it's the main cause of the fault of the unit
An externally hosted image should be here but it was not working when we last tested it.
Do you need 50? If mouser is impractical, I would see if a local electronics store might have some, or could get hold of them.
If the values are right I would only make sure that the width is correct for the pcb. I cannot judge that from a picture like the one you sent, but luckily it is one of the specifications you can read off the product pages.
If the values are right I would only make sure that the width is correct for the pcb. I cannot judge that from a picture like the one you sent, but luckily it is one of the specifications you can read off the product pages.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.