Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

Transformers: Can we wind them?
Transformers: Can we wind them?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th February 2004, 02:42 AM   #1
cm961 is offline cm961  Canada
diyAudio Member
cm961's Avatar
Join Date: Jun 2001
Location: Peterborough, Ontario
Cool Transformers: Can we wind them?

I'm working on a new-ish project that I need a nice center (centre, eh?) tapped transformer. I was wondering if the possibility exists to wind our own. Now I know this is common for those of you that have attempted and perhaps succeeded with SMPS projects, but what about when dealing with mains voltages? I would assume that self made transformers might have a lower efficiency and perhaps regulation than manufactured ones like Plitron, but maybe it would be worth it cost wise. For instance, I need two transformers. They're about $70 each at Plitron. I know I can buy cheaper transformers than that, but not as nice. Perhaps I could make one. Does anyone have any info or suggestions on this? (I would buy the core ofcourse)...

  Reply With Quote
Old 6th February 2004, 02:52 AM   #2
ashok is offline ashok
diyAudio Member
ashok's Avatar
Join Date: Jun 2002
Location: 3RS
Transformers: Can we wind them?
Default Hand wound transformers .

You apparently have a company in the US ( Hand Wound Transformers ?) that has been mentioned earlier on this forum. They supply the core with the primary wound on . You will have to wind the seconday as you desire.
I don't see why they should be poorer in quality than the readymade ones. EI cores are different from Toroid cores. You can't wind a toroid core easily by hand. You need a machine.

The EI is relatively easy to wind by hand but takes some time. Long ago I used to wind transformers manually. I hated it but had to do it . The most difficult part is winding the primary because of the thin wire. The secondary usually is relatively thick wire and is not so tough to wind. Additionally the number of turns is less.

Go ahead and wind your own. It will be just as good as many other commercial transformers provided you wind it evenly and keep the coils reasonably tight. The first one could have problems if you are not sure of what you are doing. I am sure the hand wound transformer company will give you all details required to wind properly.
Have fun.

Edit: Just saw Bob's post. Yes that is one way of winding additional coils on a toroidal transformer. This would however be useful to add some small percentage to an existing secondary on the transformer. Read that as - small number of turns.
Winding the whole secondary might be pretty tough unless the number of turns is also low. Doable I guess, but tougher than an EI core.

Hmm.... Just had a closer look at the URL. They are suggesting that you wind the whole secondary ! I have never wound a toroid .This might be easier that I thought. Check it out.
  Reply With Quote
Old 6th February 2004, 02:53 AM   #3
BobEllis is offline BobEllis  United States
diyAudio Member
BobEllis's Avatar
Join Date: Sep 2003
Location: Upstate NY
kits http://www.toroid.com/standard_trans...ormer_kits.htm
  Reply With Quote


Transformers: Can we wind them?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Different way to wind inductors? Jeff R Multi-Way 30 11th September 2012 03:30 AM
ion-wind lifter WrineX Planars & Exotics 2 29th March 2007 03:35 PM
How To? wind coils FastEddy Multi-Way 9 24th July 2006 03:09 AM
How to wind a transformer MaXiZ Solid State 13 8th December 2003 01:07 AM
Help: Re-wind Speaker Jay Multi-Way 1 1st September 2003 09:21 AM

New To Site? Need Help?

All times are GMT. The time now is 10:01 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio