Eagle Library Part

Devil_H@ck · 4th February 2004, 09:03 PM

Has anyone got an Eagle library that contains either the Texas Instruments PGA2310 or the Cirrus Logic CS3310?

If so, could you please contact me or post an URL or something?

Petter · 4th February 2004, 10:17 PM

It is not that hard to make them yourself albeit a bit counterintuitive. It is a 3 part process:

1. Make footprint
2. Make schematic symbol
3. Connect the two.

Look in the help files and you will get it.

Petter

mik · 5th February 2004, 03:14 PM

http://vulcan.ece.ucsb.edu/ece189/tutorials.html

Devil_H@ck · 5th February 2004, 06:36 PM

Thanks, I started creating it right away, however it might take a while before it's finished.
I'll put a link here once I finished it.

Devil_H@ck · 5th February 2004, 07:29 PM

Ok, that was quite easy actually.
The DIP16 package seems to broad at first, but I checked it against a part with a DIP16 package that was already in Eagle and the pads are in the same place.

Enjoy: PGA2310 Eagle model

PS: If you find a mistake, please tell me! This was the first time I tried making a part.

ohhh2 · 27th May 2006, 10:08 AM

Hi Devil_H@ck,

Have you a new link for PGA2310 model library for eagle because the link is down.

Thank you in advance.

bye

pinkmouse · 27th May 2006, 12:01 PM

It would probably take a tenth the time you will spend waiting just to make the part yourself!

dfdye · 28th May 2006, 02:25 AM

. . . . And then you would know how to do it, and that it was right.

I, unfortunately, have gotten some pretty sketchy Eagle packages from others before. I'm not saying Devil_H@ck goofed his up, but I have gotten goofy ones before. Better to do it yourself and be sure.

David

jleaman · 28th May 2006, 02:46 AM

thank's for the link's Now i can make my own part's

4th February 2004, 09:03 PM	#1
Devil_H@ck diyAudio Member Join Date: Dec 2003 Location: Belgium	Eagle Library Part Has anyone got an Eagle library that contains either the Texas Instruments PGA2310 or the Cirrus Logic CS3310? If so, could you please contact me or post an URL or something?

27th May 2006, 12:01 PM	#7
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	It would probably take a tenth the time you will spend waiting just to make the part yourself! __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eagle Library for OPT?	torrence	Tubes / Valves	0	16th May 2009 09:36 AM
lm4780 eagle library	djronbxs	Chip Amps	1	21st September 2007 03:14 PM
PCB Relay Eagle library	hownc	Parts	0	13th February 2007 08:20 PM
Eagle Library Search	dsavitsk	Digital Source	3	11th January 2006 04:38 PM
TDA1541A & eagle library	ZERS	Digital Source	11	14th January 2004 08:46 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th February 2004, 10:17 PM	#2
Petter diyAudio Member Join Date: Jan 2001 Location: Scandinavia	It is not that hard to make them yourself albeit a bit counterintuitive. It is a 3 part process: 1. Make footprint 2. Make schematic symbol 3. Connect the two. Look in the help files and you will get it. Petter

5th February 2004, 03:14 PM	#3
mik diyAudio Member Join Date: Dec 2001 Location: Serbia	http://vulcan.ece.ucsb.edu/ece189/tutorials.html

5th February 2004, 06:36 PM	#4
Devil_H@ck diyAudio Member Join Date: Dec 2003 Location: Belgium	Thanks, I started creating it right away, however it might take a while before it's finished. I'll put a link here once I finished it.

5th February 2004, 07:29 PM	#5
Devil_H@ck diyAudio Member Join Date: Dec 2003 Location: Belgium	Ok, that was quite easy actually. The DIP16 package seems to broad at first, but I checked it against a part with a DIP16 package that was already in Eagle and the pads are in the same place. Enjoy: PGA2310 Eagle model PS: If you find a mistake, please tell me! This was the first time I tried making a part.

27th May 2006, 10:08 AM	#6
ohhh2 diyAudio Member Join Date: May 2006	Hi Devil_H@ck, Have you a new link for PGA2310 model library for eagle because the link is down. Thank you in advance. bye

28th May 2006, 02:25 AM	#8
dfdye diyAudio Member Join Date: Dec 2005 Location: USA	. . . . And then you would know how to do it, and that it was right. I, unfortunately, have gotten some pretty sketchy Eagle packages from others before. I'm not saying Devil_H@ck goofed his up, but I have gotten goofy ones before. Better to do it yourself and be sure. David

28th May 2006, 02:46 AM	#9
jleaman Banned Join Date: Apr 2002	thank's for the link's Now i can make my own part's

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)