Hi Thomas,
I've been using the boards from ELFA (http://www.elfa.se/) in Sweden for a while. It is standard stuff and they have 1.55 mm thick boards with either 17.5u, 35u, 70u or even 105u nowadays. The 105u should be great for amplifiers since it is 3 times the normal thickness.
/UrSv
I've been using the boards from ELFA (http://www.elfa.se/) in Sweden for a while. It is standard stuff and they have 1.55 mm thick boards with either 17.5u, 35u, 70u or even 105u nowadays. The 105u should be great for amplifiers since it is 3 times the normal thickness.
/UrSv
Hi Thomas,
I normally use the 70 um ones from "Bungard" . You can have them in a lot of standard sizes, single or double sided. In Germany you can order them at Conrad (www.conrad.de)
william
I normally use the 70 um ones from "Bungard" . You can have them in a lot of standard sizes, single or double sided. In Germany you can order them at Conrad (www.conrad.de)
william
Thomas,
the Bungard stuff is superior and their representative on an electronics fair showed me they manufacture all possible a PCB thicknesses and copper layer thicknesses. I did not need it, so i didn't pursue it further, but look for Bungard on the web, you can order directly from them TMK.
the Bungard stuff is superior and their representative on an electronics fair showed me they manufacture all possible a PCB thicknesses and copper layer thicknesses. I did not need it, so i didn't pursue it further, but look for Bungard on the web, you can order directly from them TMK.
In Denmark, then try my favorite supplyer : http://www.lautronic.dk/
A good searchmachine for things like that is www.ii.dk , purely danish.
A good searchmachine for things like that is www.ii.dk , purely danish.
Thanks! - Again! 
... Meanwhile I found 70u PCB in walking distance from where I live.
Bernard: http://bungard.com looks interesting. They shure have an impressive selection. Five laminate types including PTFE, six thciknes of boards, and three copper. Combined thats 90 different PCB types. Strangely enough their webside only showed up to 70u thickness of copper.
Hoffmeyer: Lautronic is in my permanent bookmark collecion form now on. They have a nice selection of PCB including 105u and accessories for print making.
... Meanwhile I found 70u PCB in walking distance from where I live.
Bernard: http://bungard.com looks interesting. They shure have an impressive selection. Five laminate types including PTFE, six thciknes of boards, and three copper. Combined thats 90 different PCB types. Strangely enough their webside only showed up to 70u thickness of copper.
Hoffmeyer: Lautronic is in my permanent bookmark collecion form now on. They have a nice selection of PCB including 105u and accessories for print making.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.