Source for 1% TRT Dynamicaps? - diyAudio
Go Back   Home > Forums > Design & Build > Parts
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 18th November 2003, 05:12 AM   #1
diyAudio Member
Join Date: Jul 2003
Location: Columbus, Mississippi
Default Source for 1% TRT Dynamicaps?

See Subject. Michael Percy will sell matched pairs, but doesn't sell to a certain value. I need that for RIAA caps.

Greg in Minneapolis
  Reply With Quote
Old 22nd November 2003, 08:36 AM   #2
diyAudio Member
Join Date: Mar 2002
Location: Soquel, CA
Don't think anything but what Percy sells are available unless you order at least 100 of a value directly from TRT (Peter Moncrief). I believe TRT has a website. Also IAR-80 is a website of his. You could email Peter.
  Reply With Quote
Old 28th November 2003, 01:03 AM   #3
diyAudio Member
Join Date: Jul 2003
Location: Columbus, Mississippi
Default I'm Honored...

I didn't expect to get an answer from 'THE' Ric Schultz... I am honored! Inspired by your Ultimate Attenuators, I recently (last summer) converted my Q&D ladder attenuator to a switched shunt mode... thanks for popularizing this.

I also appreciate your tips and tweaks on your website. Sorry, I'm too much of a poor audiophile, builder, and tweaker to buy one of your pieces of gear right now, but your free sharing of ideas has been invaluable!

Enough of the Ric Schultz fanclub stuff, back to the original thread, Part Connexion did go through their stock of Dynamicaps to select values for a very reasonable fee... and got them to me about 5 days faster than they said. The only problem was that the .01's all came up a bit over-value and they called Peter Moncrieff and confirmed that most of this line does come out a bit over and that they wouldn't find my exact value... I'll have to play with other values to get the RIAA exactly right.

Here's a question for the capacitor mavens out there... in addition to the Dynamicaps, what other brands of caps should I consider for RIAA equalization caps in .01 and .033 values?


Greg in Minneapolis
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Source follower and common source output stages slogan2112 Pass Labs 2 9th October 2008 08:19 PM
What do you guys think about Dynamicaps? KT Parts 1 24th March 2006 01:34 PM
Aleph-type current source, but source follower this time tschrama Pass Labs 4 29th July 2005 12:55 PM
DynamiCaps gaincell Parts 0 6th January 2005 06:50 AM
Source follower electret mike -> use with current source? capslock Solid State 1 28th February 2003 12:54 PM

New To Site? Need Help?

All times are GMT. The time now is 04:35 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2