In sure this has been discussed previously but I can't find any info (bit more difficult using tapatalk).
What's the general consensus on adding additional windings to toroidal transformers???
I have a 2 x 12v 30va that I'm using for the analogue output stage in my CDP. As I wanted to remove the original transformer , I needed an independent 4.3vAC winding. I tried a few wraps of thin insulated wire on the toroid and worked out that I needed about 46 wraps. I spaced them evenly around the core and got what I wanted.
I'm sure I've broken many cardinal rules but I'm very kean to learn.......
You can see the white insulated additional winding in the picture
What's the general consensus on adding additional windings to toroidal transformers???
I have a 2 x 12v 30va that I'm using for the analogue output stage in my CDP. As I wanted to remove the original transformer , I needed an independent 4.3vAC winding. I tried a few wraps of thin insulated wire on the toroid and worked out that I needed about 46 wraps. I spaced them evenly around the core and got what I wanted.
I'm sure I've broken many cardinal rules but I'm very kean to learn.......
You can see the white insulated additional winding in the picture
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.