knurled nuts

merlin el mago · 10th December 2012, 05:08 PM

Where to buy brass knurled nuts 2mm diameter?

marce · 10th December 2012, 06:58 PM

I havn't searched, but a somewhere that does parts fo RC cars and planes might be a good start.

merlin el mago · 10th December 2012, 07:00 PM

Thanks marce.

Enzo · 10th December 2012, 11:13 PM

Like these?

McMaster-Carr

marce · 11th December 2012, 08:24 AM

Cool,I was wondering what they were called myself.

merlin el mago · 11th December 2012, 09:31 AM

Quote:

Originally Posted by Enzo

Like these?

McMaster-Carr

Thanks Enzo, unfortunately don't sell to Europe.

Enzo · 11th December 2012, 10:01 PM

At least you have a point of reference. I have to think Europe has hardware distributors.

Have you looked in the electronics parts houses? Here I use Mouser, but you have places like Farnell and RS?

If McMaster doesn't sell overseas, perhaps they could tell you who does?

merlin el mago · 12th December 2012, 10:50 AM

Thanks again Enzo.

The Space Egg Corp · 14th December 2012, 02:55 AM

Hi Felipe

What's this ?
Shaking all the nuts loose, with the new valve amp ?
Piano still s w e e t I hope !

Cheers

Si.

PS...Buy nuts well before Christmas...
...sometimes our shop runs out !

merlin el mago · 14th December 2012, 11:27 AM

Hi Si

It's for cartrdige to replace the steel tha I have.

Cheers
Felipe

10th December 2012, 05:08 PM	#1
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	knurled nuts Where to buy brass knurled nuts 2mm diameter?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
knurled shaft potentiometer	kblnig	Analogue Source	0	24th September 2011 10:38 PM
Well-Nuts, anyone?	Phil Olson	Multi-Way	4	17th September 2009 10:10 PM
insert t nuts	mhtplsh	Multi-Way	17	31st October 2008 07:54 PM
I'm going nuts over these bolts	Hefty	Multi-Way	8	24th December 2003 10:06 PM
Hello all .... from a turntable nuts	dice45	Introductions	22	23rd February 2002 09:25 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th December 2012, 06:58 PM	#2
marce diyAudio Member Join Date: Jun 2007 Location: Blackburn, Lancs	I havn't searched, but a somewhere that does parts fo RC cars and planes might be a good start.

10th December 2012, 07:00 PM	#3
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	Thanks marce.

10th December 2012, 11:13 PM	#4
Enzo diyAudio Member Join Date: Sep 2004 Location: Lansing, Michigan	Like these? McMaster-Carr

11th December 2012, 08:24 AM	#5
marce diyAudio Member Join Date: Jun 2007 Location: Blackburn, Lancs	Cool,I was wondering what they were called myself.

11th December 2012, 10:01 PM	#7
Enzo diyAudio Member Join Date: Sep 2004 Location: Lansing, Michigan	At least you have a point of reference. I have to think Europe has hardware distributors. Have you looked in the electronics parts houses? Here I use Mouser, but you have places like Farnell and RS? If McMaster doesn't sell overseas, perhaps they could tell you who does?

12th December 2012, 10:50 AM	#8
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	Thanks again Enzo.

14th December 2012, 02:55 AM	#9
The Space Egg Corp diyAudio Member Join Date: Sep 2010 Location: London & Miami Blog Entries: 13	Hi Felipe What's this ? Shaking all the nuts loose, with the new valve amp ? Piano still s w e e t I hope ! Cheers Si. PS...Buy nuts well before Christmas... ...sometimes our shop runs out !

14th December 2012, 11:27 AM	#10
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	Hi Si It's for cartrdige to replace the steel tha I have. Cheers Felipe