diyAudio (
-   Parts (
-   -   Help in designing PCB (

kulamario 12th November 2012 01:02 PM

Help in designing PCB
2 Attachment(s)
Hello all
I am a beginner electronics project I wanted to do your audio driver I have already pre-made ​​pattern but I can not do PCB
I have a big request of one of the more experienced colleagues can help me? I mean one sided PCB for thermal transfer method (as most smaller but convenient to do)
I do not know what programs are using CadSoft EAGLE I am using
Adds a file to the Eagle and PDF

marce 13th November 2012 12:01 PM

Single sided wouldbe a big compramise, two layer would be better.

kulamario 13th November 2012 01:10 PM

so i know that it was better, but the double side PCB is harder to do at home
as will several bridges that nothing will happen but not too much

marce 13th November 2012 02:06 PM

I would aim to get the majority of routes on the top layer and use the bottom for a ground plane, with as few tracks as possible.
Displays are noisy and without a contigous ground plane it could get very noisy.

kulamario 14th November 2012 08:45 AM

Can you help me with this PCB
Very you please help
I do not know anyone who could help me
i fight with this project from a one month and I no managed to do
Now I'm looking for help on the forums but also no response

All times are GMT. The time now is 08:50 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio