diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Parts (http://www.diyaudio.com/forums/parts/)
-   -   Changing the barrel connector (http://www.diyaudio.com/forums/parts/222009-changing-barrel-connector.html)

ggking7 22nd October 2012 12:24 PM

Changing the barrel connector
 
This question reveals the extent of my ignorance, but I need to change the barrel connector on a particular cable by cutting the cable, cutting the cable which connects the correct barrel connector to a power supply, and soldering the wires together. Do I need to solder the two wires in a particular configuration or can I attach them either way?

hochopeper 22nd October 2012 12:29 PM

Yes.

You should test the polarity of the connection before cutting the wire. Then ensure that it is the same after re-termination.

ggking7 31st October 2012 06:26 PM

All done, thanks!


All times are GMT. The time now is 10:24 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2