diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Parts (http://www.diyaudio.com/forums/parts/)
-   -   Nichicon KA - new at Mouser (http://www.diyaudio.com/forums/parts/215309-nichicon-ka-new-mouser.html)

sonidos 28th June 2012 06:37 PM

Nichicon KA - new at Mouser
 
Has anyone seen the new Nichicon KA caps at Mouser? Right off the bat I noticed rated at 105C. Someone got a scoop on these babies?

sonidos 28th June 2012 06:39 PM

To speed things up - linkie:

UKA1H471MHD1TO Nichicon | Mouser

magnetman 21st July 2012 09:31 PM

Hi I know this thread is old, but I am going to try these out. I bought them by mistake, so why not. so I will let you know when I know

cheers

wushuliu 5th September 2012 07:06 PM

Quote:

Originally Posted by magnetman (Post 3100059)
Hi I know this thread is old, but I am going to try these out. I bought them by mistake, so why not. so I will let you know when I know

cheers

how are the caps?

sonidos 5th September 2012 07:17 PM

I got them now and will use them in the Richard Marsh headphone amp. I should post a pic for everyone. They have a nice blue-gray color to them. (not that the wrapping means anything!) ;)

magnetman 5th September 2012 09:10 PM

ok SO, I have them in my tubelab SE 300b, Thus far they seem to be quite reasonable however the amp is still breaking in. I also wonder if where I have used them really colours the sound all that much. ie Cathode of a 5842 to ground.

Luke

sonidos 5th September 2012 09:48 PM

I am using them close to the output transistors. I'm wiring them from power rails to ground. I also have some Muse caps and will try them to see if I really discern some difference at all.

sonidos 6th September 2012 01:56 PM

Photo
 
1 Attachment(s)
here's the photo I took last night. They sure do like electrolytics! :D

scott17 6th September 2012 02:06 PM

If you need a higher voltage, I've used these with great results.

http://nichicon-us.com/english/products/pdfs/e-kx.pdf

Dzius 3rd April 2013 07:12 PM

Any new opinion about Nichicon KA caps ? Are they better or equal than Elna Silmic II ?


All times are GMT. The time now is 04:04 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2