mcintosh 2100 transformer damage in transist - diyAudio
Go Back   Home > Forums > Design & Build > Parts
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th March 2012, 10:52 PM   #1
lizo is offline lizo  United States
diyAudio Member
 
Join Date: Dec 2011
Location: hawaii
Unhappy mcintosh 2100 transformer damage in transist

I had a mcintosh 2100 mailed, but it arrived with the transformer housing slighlty off square which I suspect was caused during shipping. A couple of the hold down bolts are loose or snapped, what is invovled in removing and/or re securing these black boxes to the frame again? Lizo
  Reply With Quote
Old 9th March 2012, 10:43 AM   #2
h_a is offline h_a  Europe
diyAudio Member
 
h_a's Avatar
 
Join Date: Sep 2006
Location: Graz, Austria
If you suspect damage, you should try to check whether the unit is actually working properly before firing it up.

If you don't check the internals, it might have an internal short somewhere that adds additional damage when plugged in.

Of course it's certainly also a good idea to use additionally a bulb wired in series as current limiter.

But of course I hope that there's only cosmetic damage!

Hannes
__________________
High Octane phono preamp Wiki
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
McIntosh 2100 39000uF cap replacement lizo Parts 3 21st January 2012 11:51 PM
replacing output transistors on mcintosh 2100 power amp lizo Parts 3 28th December 2011 02:28 AM
replacing output transistors on mcintosh 2100 power amp lizo Parts 5 27th December 2011 07:22 PM
repair gain controls on mcintosh 2100 power amp lizo Parts 2 23rd December 2011 09:06 PM
McIntosh transformer turns ratio SpreadSpectrum Tubes / Valves 8 27th December 2008 10:50 PM


New To Site? Need Help?

All times are GMT. The time now is 12:05 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki