Why Is Silver/Teflon Wire So Difficult To Buy?

2MuchRiceMakesMeSick · 11:17 PM

I want to buy 1000ft 14 awg wire but every single place I talk to wants a reseller/tax id. I must have called 15 places and none of them will sell to an individual.

M22759-9-14 or (M22759-11-14)
M27500-16-RC2-S06

Does anyone know where I can purchase silver plated teflon jacket wire?

dirkwright · 2nd February 2012, 11:07 PM

I'm surprised you don't need a loan to buy that.

Apex Jr · 2nd February 2012, 11:09 PM

I have the M22759/11 600V or M16878/4
But you ask for 14 Awg but your p/n is 16 Awg
and the M22759/9 is rated at 1000V is that what you want?

Steve

2MuchRiceMakesMeSick · 2nd February 2012, 11:16 PM

what part number would you recommend? (typo on the 16/14)
I just need silver coated copper and oxygen free with teflon jacket

M22759-9-14 is for single wire 14awg that i will twist
Should I use M22759-11-14 instead?

M27500-16-RC2-S06 is for preamp / 2 wire with shield that I will use to make XLR cables (16awg)

2MuchRiceMakesMeSick · 2nd February 2012, 11:20 PM

Quote:

Originally Posted by dirkwright

I'm surprised you don't need a loan to buy that.

its about 2x tinned copper, at least the places ive been getting a quote.

2MuchRiceMakesMeSick · 2nd February 2012, 11:21 PM

Quote:

Originally Posted by Apex Jr

I have the M22759/11 600V or M16878/4
But you ask for 14 Awg but your p/n is 16 Awg
and the M22759/9 is rated at 1000V is that what you want?

Steve

M22759/9 is just a little thicker jacket then the M22759/11 they are both the same to me and like 2 cents ft difference

Speedskater · 2nd February 2012, 11:31 PM

Electronic Surplus lists some 12AWG. Give them a call, as most of their stock never makes it to the web-page.

Teflon

Speedskater · 2nd February 2012, 11:35 PM

Quote:

Originally Posted by 2MuchRiceMakesMeSick

M27500-16-RC2-S06 is for preamp / 2 wire with shield that I will use to make XLR cables (16awg)

That would make a strange balanced interconnect.

Apex Jr · 3rd February 2012, 03:25 AM

Quote:

Originally Posted by 2MuchRiceMakesMeSick

what part number would you recommend? (typo on the 16/14)
I just need silver coated copper and oxygen free with teflon jacket

M22759-9-14 is for single wire 14awg that i will twist
Should I use M22759-11-14 instead?

M27500-16-RC2-S06 is for preamp / 2 wire with shield that I will use to make XLR cables (16awg)

If you can use 600V either M22759/11 or M16878/4
I have in stock....
14 Awg is $325.00 per 1000ft
16 Awg is $240.00 per 1000ft
As for the M27500 I only have a 2 conductor 22 Awg

Steve
steve.apexjr@prodigy.net
Apex Jr.Home Page

Speedskater · 3rd February 2012, 01:55 PM

Quote:

Originally Posted by Speedskater

That would make a strange balanced interconnect.

Opps, I was looking at the wrong part number.

2nd February 2012, 10:31 PM	#1
2MuchRiceMakesMeSick diyAudio Member Join Date: Oct 2011	Why Is Silver/Teflon Wire So Difficult To Buy? I want to buy 1000ft 14 awg wire but every single place I talk to wants a reseller/tax id. I must have called 15 places and none of them will sell to an individual. M22759-9-14 or (M22759-11-14) M27500-16-RC2-S06 Does anyone know where I can purchase silver plated teflon jacket wire? Last edited by 2MuchRiceMakesMeSick; 2nd February 2012 at 11:17 PM.

2nd February 2012, 11:31 PM	#7
Speedskater diyAudio Member Join Date: Sep 2002 Location: Lakewood, Ohio	Electronic Surplus lists some 12AWG. Give them a call, as most of their stock never makes it to the web-page. Teflon __________________ Kevin

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Triple Teflon Shielding Pure Silver Cable S1.0	A&B-SYSTEMS	Vendor's Bazaar	0	7th September 2009 05:03 PM
22 AWG silver plated solid copper wire for speaker wire?	G	Full Range	21	15th February 2009 09:32 PM
teflon wire stripper	sam9	Parts	15	12th February 2005 09:42 AM
For sale: Habia Silver plated teflon insulated copper wire	Magura	Swap Meet	29	8th December 2004 07:58 PM
How to DIY teflon/silver PCB???	Prune	Parts	10	24th June 2004 08:22 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd February 2012, 11:07 PM	#2
dirkwright diyAudio Member Join Date: May 2011 Location: Virginia	I'm surprised you don't need a loan to buy that.

2nd February 2012, 11:09 PM	#3
Apex Jr diyAudio Member Join Date: Jun 2002 Location: Torrance, Calif	I have the M22759/11 600V or M16878/4 But you ask for 14 Awg but your p/n is 16 Awg and the M22759/9 is rated at 1000V is that what you want? Steve

2nd February 2012, 11:16 PM	#4
2MuchRiceMakesMeSick diyAudio Member Join Date: Oct 2011	what part number would you recommend? (typo on the 16/14) I just need silver coated copper and oxygen free with teflon jacket M22759-9-14 is for single wire 14awg that i will twist Should I use M22759-11-14 instead? M27500-16-RC2-S06 is for preamp / 2 wire with shield that I will use to make XLR cables (16awg)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)