|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
20th December 2011, 07:45 PM
|
#1 |
|
diyAudio Member
Join Date: Oct 2006
|
Pot Mounting Bracker
Hi,
Do you know where I can order online in the US those 90 deg. metal brackets to mount pots. The one used with the pot shaft extension. I went to the local hardware store, they have those 90 deg. brackets but the metal is so thick and has holes pre drilled. would Home Depot have something? Thanks |
|
|
20th December 2011, 07:52 PM
|
#2 |
|
diyAudio Member
|
Home depot, Lowes, or any good local hardware store will have lengths (usually 4ft) of 1", 1.5", and 2" angle aluminum or steel. Cut it on a bandsaw, with a jig saw, or a hand saw down to the length you need (probably 1 or 2") and drill the holes you require.
__________________
AJ |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Turn a log pot into a (kind of) linear pot | osterchrisi | Parts | 4 | 12th October 2011 01:40 PM |
| Volume control : - pot' or pot' variable feedback resistor (gain) ? | ash_dac | Solid State | 5 | 1st August 2006 05:07 AM |
| Effect of using 50k pot instead of 100k pot in tube preamp? | KT | Tubes / Valves | 5 | 17th February 2006 09:56 PM |
| what is the mounting depth and mounting diameter of this? | lemans23 | Multi-Way | 2 | 26th October 2005 10:52 PM |
| Converting a DACT series pot to a shunt pot | Dr.H | Chip Amps | 9 | 2nd December 2004 01:55 PM |
| New To Site? | Need Help? |
