Just hand-picked a few 2010 and 2011 Mac mini cases, they are beautiful inside and out, machined from one piece aluminum, anodized, only hardly noticeable, minor scratches on the back or bottom... If used for computer case it can only take thin mini-ITX mother board, while turned over it looks like it was built for tube amplifier or CD transport
I know you can order from ebay or taobao but the truth is good ones are hard to come by, many have deep scratches all over it, it took me 4 hours in the store checking hundreds of cases before I found these 16.
Images at www(dot)head-fi(dot)org/t/579643/amplifier-and-or-source-component-in-2010-2011-mac-mini-case
I know you can order from ebay or taobao but the truth is good ones are hard to come by, many have deep scratches all over it, it took me 4 hours in the store checking hundreds of cases before I found these 16.
Images at www(dot)head-fi(dot)org/t/579643/amplifier-and-or-source-component-in-2010-2011-mac-mini-case
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.