|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
3rd October 2011, 06:24 AM
|
#1 |
|
diyAudio Member
Join Date: Oct 2011
|
Need to make a loadbox with line out.
So im moving out into an appartment and dont have the room for my 4x12 guitar cabinet. I was wondering if anyone could hook me up with a schematic or drawing to a load box that also had a line out so I could get the preamp and poweramp tone from my 80w tube amp.
This is all for recording purposes as the line out will go to my interface and ill use IRs for cabinet modelings. Im mainly interested both together not just the load box. This is also my first post so hi everyone! 
Last edited by kylendmkylendm; 3rd October 2011 at 06:38 AM. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Can someone help me make a parallel line level buffer/head phone driver circuit | 0wn3dwill | Analog Line Level | 1 | 3rd September 2011 05:12 PM |
| Need to make 3 line outs from 1 | Stream | Analog Line Level | 8 | 26th September 2009 01:59 PM |
| Feasible to make a line-level 3rd-order infrasonic filter? | noah katz | Subwoofers | 19 | 21st September 2005 06:35 PM |
| Neet to make a + 0 - 12dB software controllable line level amp. | bans25 | Solid State | 8 | 20th April 2005 06:31 PM |
| New To Site? | Need Help? |
| Page generated in 0.05527 seconds (65.22% PHP - 34.78% MySQL) with 10 queries |
