Long shot: You wouldn't have the schematic or Service Manual by any chance?
I have a CD-100se unit originally bought in the UK on the project rack for sometime now. I managed to reconfigure the mains transformer for 110V, but the drive is just not powering up. I am obviously overlooking something.
Neither the local dealer, nor the Chinese manufacturer were very helpful.
Best
Mayank
I have a CD-100se unit originally bought in the UK on the project rack for sometime now. I managed to reconfigure the mains transformer for 110V, but the drive is just not powering up. I am obviously overlooking something.
Neither the local dealer, nor the Chinese manufacturer were very helpful.
Best
Mayank
Hi, sorry no manual nor schematic. Was it new when you bought it? My friends unit drive wasn't powering up either .The problem was loose and broken wires coming out of CD drive. They just hang there and are flexing when the drawer opens and closes causing them to stress and brake. Unfortunatelly, I didn't notice
a vacum fluorescent display seal right next to the drawer edge and I wrecked the display, so be very carefull when checking and take the face plate off before trying to remove the drive.
a vacum fluorescent display seal right next to the drawer edge and I wrecked the display, so be very carefull when checking and take the face plate off before trying to remove the drive.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.