Shanling Cd-S100/ Music Hall 25 (25.2) fluorescent display source?

limono · 4th August 2011, 01:38 PM

Mine (actually a friends one) is bumped and need display to be replaced. Its a generic part . Anybody got the source?

Mayank · 5th August 2011, 12:48 AM

Long shot: You wouldn't have the schematic or Service Manual by any chance?

I have a CD-100se unit originally bought in the UK on the project rack for sometime now. I managed to reconfigure the mains transformer for 110V, but the drive is just not powering up. I am obviously overlooking something.

Neither the local dealer, nor the Chinese manufacturer were very helpful.

Best
Mayank

limono · 5th August 2011, 01:22 AM

Hi, sorry no manual nor schematic. Was it new when you bought it? My friends unit drive wasn't powering up either .The problem was loose and broken wires coming out of CD drive. They just hang there and are flexing when the drawer opens and closes causing them to stress and brake. Unfortunatelly, I didn't notice
a vacum fluorescent display seal right next to the drawer edge and I wrecked the display, so be very carefull when checking and take the face plate off before trying to remove the drive.

4th August 2011, 01:38 PM	#1
limono diyAudio Member Join Date: Mar 2007	Shanling Cd-S100/ Music Hall 25 (25.2) fluorescent display source? Mine (actually a friends one) is bumped and need display to be replaced. Its a generic part . Anybody got the source?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Source for Music Hall CD25.2 fluorescent display (or module) ?	limono	Digital Source	0	4th August 2011 01:09 PM
Music Hall CD 25.2 $400	Michael Rothacher	Swap Meet	0	2nd May 2010 08:54 PM
music hall cd-25 problem	kenton shoemake	Digital Source	1	28th September 2005 12:07 PM
Music Hall CD-25 Cap values?	andrzejpw	Digital Source	0	15th May 2004 10:13 PM
Music Hall mmf cd 25?	woody	Digital Source	0	20th October 2003 12:16 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th August 2011, 12:48 AM	#2
Mayank diyAudio Member Join Date: Oct 2004 Location: Falls Church, VA	Long shot: You wouldn't have the schematic or Service Manual by any chance? I have a CD-100se unit originally bought in the UK on the project rack for sometime now. I managed to reconfigure the mains transformer for 110V, but the drive is just not powering up. I am obviously overlooking something. Neither the local dealer, nor the Chinese manufacturer were very helpful. Best Mayank

5th August 2011, 01:22 AM	#3
limono diyAudio Member Join Date: Mar 2007	Hi, sorry no manual nor schematic. Was it new when you bought it? My friends unit drive wasn't powering up either .The problem was loose and broken wires coming out of CD drive. They just hang there and are flexing when the drawer opens and closes causing them to stress and brake. Unfortunatelly, I didn't notice a vacum fluorescent display seal right next to the drawer edge and I wrecked the display, so be very carefull when checking and take the face plate off before trying to remove the drive.