Anyone know where to get 2SJ162/2SK1058 IN THE US

[Ivey]

I DESIRE TO PURCHASE THESE MOSFETS IN THE US, I DO NOT WANT TO PURCHASE THEM ON EBAY, BECAUSE THEY COULD BE FAKE.

TAKE CARE

IVEY

[hags]

I won't be a smart *** like some of the people I run into when I ask questions on here.

Here you go:

B&D Enterprises - Electronic Components Distributor

B&D Enterprises - Electronic Components Distributor

I've bought from them, they are a good company.

[hags]

You can try these guys too. Slightly less expensive.

Hitachi FET To-3p P-channel -160v -7A 100w GSD *SS | Distributed By MCM


Hitachi FET To-3p N-channel 160v 7A 100w GSD *SS | Distributed By MCM

Also, a good, reputable company.

[Ivey]

B&D APPEARS TO BE VERY EXPENSIVE. MCM IS SOMEWHAT MORE TO EARTH, YET ITS PRICES ARE ALSO IN THE HIGH PRICE RANGE.

IF I CAN NOT COME ACROSS A COMPANY THAT ALLOWS ME TO OBTAIN THEM BOTH FOR ABOUT $12.00 DOLLARS A SET. I WILL STAY WITH HEXFETS.

THESE VENDORS ARE PLOTTING TO GET RICH ON US DIY PERSONS. EVERYDAY, IT IS THE SAME OLD STORY, INCREASING PRICES FOR THE SAME OLD ITEMS, THAT WERE DESIGNED 30 TO 50 YEARS AGO. I DO NOT SEE WHERE THEY ARE GETTING THEIR INCREASES, BECAUSE THE COST OF SHIPPING AND HANDLING, ONLY INCREASED ABOUT $1.30 PER HUNDRED WEIGHT, AND MOST IF NOT ALL, CARGO TRANSPORT IS DONE IN CONTAINER UNITS.

I WILL LOOK AROUND JUST A LITTLE MORE. BUT I DO BELIEVE I WILL BE FORCED TO REMAIN WITH HEXFETS.

TAKE CARE

IVEY

[tryonziess]

You can try Ampslab and see if there prices are more to your liking. They have both in stock.

Good Luck. Tad

[hags]

Originally Posted by Ivey

B&D APPEARS TO BE VERY EXPENSIVE. MCM IS SOMEWHAT MORE TO EARTH, YET ITS PRICES ARE ALSO IN THE HIGH PRICE RANGE.

IF I CAN NOT COME ACROSS A COMPANY THAT ALLOWS ME TO OBTAIN THEM BOTH FOR ABOUT $12.00 DOLLARS A SET. I WILL STAY WITH HEXFETS.

THESE VENDORS ARE PLOTTING TO GET RICH ON US DIY PERSONS. EVERYDAY, IT IS THE SAME OLD STORY, INCREASING PRICES FOR THE SAME OLD ITEMS, THAT WERE DESIGNED 30 TO 50 YEARS AGO. I DO NOT SEE WHERE THEY ARE GETTING THEIR INCREASES, BECAUSE THE COST OF SHIPPING AND HANDLING, ONLY INCREASED ABOUT $1.30 PER HUNDRED WEIGHT, AND MOST IF NOT ALL, CARGO TRANSPORT IS DONE IN CONTAINER UNITS.

I WILL LOOK AROUND JUST A LITTLE MORE. BUT I DO BELIEVE I WILL BE FORCED TO REMAIN WITH HEXFETS.

TAKE CARE

IVEY

Well, that's the way it is, unfortunately, for hard to source parts, you pay a premium. Try sourcing anything from Borbely. $$$$$$

Ampslab has 'em as well. $40 for 6 pieces, 3 2SK1058 and 3 2SJ162.

Good Luck.

[Ivey]

Ampslab, good price. $6.6666 each, I just contacted them and I will place an order.

Thank you Gentlemen. Thank you

[hags]

Originally Posted by Ivey

Ampslab, good price. $6.6666 each, I just contacted them and I will place an order.

Thank you Gentlemen. Thank you

Just me, but I wouldn't pay $6.66 for anything, insist they up it to $6.67 or $6.65.

[Ivey]

That's joke..., right.

Tell me that you are not .............. superstitious.

I would rather pay far less for it, but I do say, that would not be possible.

Anyway, once the units arrive, they will sit on the shelf until I have designed a proper home for them. I have a schematic of the Conrad Johnson's MF80 power amp. But the more I look at it, the more it looks like all the other Hitachi power amps.

I have a milling machine, that is 74 years young. That I use in my home shop. I am trying to sell it locally, because it is too costly to ship. I desire to buy one of the new computer control units. So that I can do more modern designs and features. Also, I am finding less and less bits, tools and repair parts; available for it. And I can not get it upgraded. Well, I can ..., but I can buy a new one for far less. And a LOT smaller.

Take Care

Ivey