Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

Low jitter crystal
Low jitter crystal
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 15th July 2003, 07:40 AM   #1
bocka is offline bocka  Germany
diyAudio Member
Join Date: Jul 2003
Location: Hannover
Default Low jitter crystal

I'm looking for a low jitter crystal, no oscillator. Has anyone experience with different manufacturers? Commonly used crystals are from Hosonic most often. Are there better types available, maybe Saronix? Has anyone used these parts?
  Reply With Quote
Old 24th July 2003, 08:29 AM   #2
MarcelvdG is offline MarcelvdG  Netherlands
diyAudio Member
Join Date: Mar 2003
Location: Haarlem, the Netherlands
Can you find any data about the crystals on the Internet? For a given frequency, the one with the highest ratio between the reactance of C1 and R (that is, the highest 1/(2*pi*f*C1*R)) should give the lowest close-in phase noise and therefore in theory the lowest low-modulation-frequency jitter. I could imagine that the oscillator noise floor has more effect than the crystal on the jitter, though. I have no experience with these matters.
  Reply With Quote
Old 24th July 2003, 09:53 AM   #3
capslock is offline capslock  Europe
diyAudio Member
Join Date: Feb 2002
Location: Germany
simple rule of thumb: if you can get the same frequency in different cases, go for the biggest case!
  Reply With Quote


Low jitter crystalHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
generate jitter test signal and measurign jitter using AP2? BJAMR Digital Source 11 1st November 2010 02:07 PM
What crystal is this?? calvinhpk Digital Source 4 24th August 2009 03:08 PM
Where to get a 44,1 kHz crystal ? Bernhard Parts 4 16th February 2008 03:30 PM
Data Jitter Versus Electrical Jitter? 300_baud Digital Source 8 16th July 2004 07:59 PM
Multiple crystal clock to reduce jitter annex666 Digital Source 7 15th August 2003 04:33 PM

New To Site? Need Help?

All times are GMT. The time now is 08:39 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio