diyAudio (
-   Parts (
-   -   High Idss 2SK170GR? (

Sweetsweetback 31st October 2010 09:25 PM

High Idss 2SK170GR?
I measured a bunch of 2SK170GR for Idss this afternoon and am a little puzzled. First, I am an electronics novice, so please forgive my ignorance.

My milliammeter has blown its fuse and I do not have a replacement in stock yet. So I decided to measure the voltage across a 100R resistor between the positive terminal of a 9V battery and the drain. I shorted the gate and source and connected them to the negative battery terminal.

My voltage readings across the resistor were in the 0.3 - 1.3V range, suggesting an IDss of 3 - 13 mA, with most clustering around 12-13 mA. This is pretty out of range for GR parts. Is there something wrong with my technique, my parts, or does Toshiba play a little fast and loose with their parts labeling?

(my first post)

Piersma 31st October 2010 09:50 PM

Are you sure that the SK170GR are genuine Toshiba parts?
Genuine Toshiba parts are within specs, no doubt.

There are a lot of counterfeiting parts supplied these days.....

Sweetsweetback 1st November 2010 12:40 AM

I have no certainty that these parts are genuine toshiba. I bought them from futurlec a few months ago. They look like any other 2sk170 I have used in the past, but who knows. It may be worth following up with futurlec Thanks for your response.


All times are GMT. The time now is 03:02 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio