Where can i get more of these resister's..

jleaman · 4th July 2003, 01:04 AM

Does any one know where i can get more of these resisters. not the value that is shown but the style. ..

thylantyr · 4th July 2003, 02:45 AM

Iron Chef recipe.

1. ordinary radio shack resistor
2. home depot can of blue spray paint.
3. office depot permanent marker.

Jocko Homo · 4th July 2003, 02:55 AM

Looks like Corning RN60D. Not made anymore.

Jocko

jleaman · 4th July 2003, 03:01 AM

MAn this sux then.. i so liked these resisters.. ill have to bug my papa for his last pile then.. he was removing them from Telephone radio equipments and stuff..

Jocko Homo · 4th July 2003, 05:49 AM

They should say "Corning Glass Works" or usually "CGW" on them. They do sound good.....I have no idea why.

Jocko

JOE DIRT® · 4th July 2003, 06:20 AM

dont tell him that...he will be goin around and ripping off old phone booths LOL

jleaman · 4th July 2003, 06:22 AM

lol...:O)

jcarr · 4th July 2003, 01:25 PM

Jason: I agree with Jocko - those resistors look like Corning RN55D or RN60D types (the difference being the wattage). Spectral used to use those resistors (back when Demian Martin was the chief designer), but I don't know if they still do. If you open up an old DMC-10 or DMA-50, you will probably see lots of those Cornings.

FWIW, those Cornings also were available in green (otherwise visually identical to the blue types that you showed).

hth, jonathan carr

Jocko Homo · 4th July 2003, 02:05 PM

Those were the '55Ds that were green. The 60Ds were blue, dark blue, or at one time, grey.

The 55Ds also came in grey.

Jocko

fdegrove · 4th July 2003, 02:38 PM

Hi,

Maybe this may help:

SURPLUS

Cheers,

P.S. Rumour has it that Corning made tantalum Rs at one point in time...does anyone happen to know a reference for those?

Ta.

4th July 2003, 01:25 PM	#8
jcarr diyAudio Member Join Date: Jul 2002 Location: Tokyo, Japan	Jason: I agree with Jocko - those resistors look like Corning RN55D or RN60D types (the difference being the wattage). Spectral used to use those resistors (back when Demian Martin was the chief designer), but I don't know if they still do. If you open up an old DMC-10 or DMA-50, you will probably see lots of those Cornings. FWIW, those Cornings also were available in green (otherwise visually identical to the blue types that you showed). hth, jonathan carr __________________ http://www.lyraconnoisseur.com/, http://www.lyraaudio.com

4th July 2003, 02:38 PM	#10
fdegrove diyAudio Senior Member Join Date: Aug 2002 Location: Belgium	Hi, Maybe this may help: SURPLUS Cheers, P.S. Rumour has it that Corning made tantalum Rs at one point in time...does anyone happen to know a reference for those? Ta. __________________ Frank

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
About INPUT RESISTER separated from ground	turnA_zpoint	Solid State	8	24th June 2010 01:36 PM
Low value IV resister followed with high gain amp stage?[tda1543]	setmenu	Digital Source	10	27th September 2004 01:14 PM
Aleph 5 resister ??	billy	Pass Labs	1	19th May 2004 04:42 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th July 2003, 02:45 AM	#2
thylantyr diyAudio Member Join Date: Feb 2001 Location: Mars	Iron Chef recipe. 1. ordinary radio shack resistor 2. home depot can of blue spray paint. 3. office depot permanent marker.

4th July 2003, 02:55 AM	#3
Jocko Homo Banned Join Date: Feb 2002 Location: As far from the NOSsers as possible	Looks like Corning RN60D. Not made anymore. Jocko

4th July 2003, 03:01 AM	#4
jleaman Banned Join Date: Apr 2002	MAn this sux then.. i so liked these resisters.. ill have to bug my papa for his last pile then.. he was removing them from Telephone radio equipments and stuff..

4th July 2003, 05:49 AM	#5
Jocko Homo Banned Join Date: Feb 2002 Location: As far from the NOSsers as possible	They should say "Corning Glass Works" or usually "CGW" on them. They do sound good.....I have no idea why. Jocko

4th July 2003, 06:20 AM	#6
JOE DIRT® diyAudio Member Join Date: Apr 2003 Location: Brantford, ON	dont tell him that...he will be goin around and ripping off old phone booths LOL

4th July 2003, 06:22 AM	#7
jleaman Banned Join Date: Apr 2002	lol...:O)

4th July 2003, 02:05 PM	#9
Jocko Homo Banned Join Date: Feb 2002 Location: As far from the NOSsers as possible	Those were the '55Ds that were green. The 60Ds were blue, dark blue, or at one time, grey. The 55Ds also came in grey. Jocko