Zaph bamtm inductor question

bizbad · 25th May 2010, 04:27 PM

Hi, I am building the bamtm and the inductor for the tweeter is a .3 mh with .2 ohms acording to his parts list. I purchased the inductor from Madisound and then noticed it is labeled .3 ohms. I can not find a .2 ohm inductor. Can I use this inductor? If not what are my options. Thanks

usmcjlp · 26th May 2010, 02:02 PM

I am in the process of building this speaker as a starter project. Can anyone answer this question?

musician9 · 31st August 2010, 08:38 AM

What gauge wire was used to wind your .3mH/.3ohm inductor? If it was 20GA, you probably need an 18GA or a 16GA, if it's 18GA, you need 16GA. If you call Madisound, they will help you out with the right inductor. I've done business with them since I was in high school, and they are very helpful.

Dave

25th May 2010, 04:27 PM	#1
bizbad diyAudio Member Join Date: May 2010	Zaph bamtm inductor question Hi, I am building the bamtm and the inductor for the tweeter is a .3 mh with .2 ohms acording to his parts list. I purchased the inductor from Madisound and then noticed it is labeled .3 ohms. I can not find a .2 ohm inductor. Can I use this inductor? If not what are my options. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
F.S. Zaph BAMTM vented floorstanding	vaughn	Swap Meet	6	7th May 2011 02:04 AM
Inductor calculations for Zaph B3S	sbrtoy	Multi-Way	16	11th September 2009 03:26 AM
Yet another Zaph BAMTM -- some questions	Consul	Multi-Way	2	30th March 2007 01:57 AM
A question to Zaph about my blog.	Spasticteapot	Everything Else	2	21st March 2007 07:10 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th May 2010, 02:02 PM	#2
usmcjlp diyAudio Member Join Date: Mar 2010	I am in the process of building this speaker as a starter project. Can anyone answer this question?

31st August 2010, 08:38 AM	#3
musician9 diyAudio Member Join Date: Aug 2010 Location: Beautiful Southern Oregon, USA	What gauge wire was used to wind your .3mH/.3ohm inductor? If it was 20GA, you probably need an 18GA or a 16GA, if it's 18GA, you need 16GA. If you call Madisound, they will help you out with the right inductor. I've done business with them since I was in high school, and they are very helpful. Dave

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)