Copper Clad Presensitized Boards

Stefanoo · 12th May 2010, 10:26 PM

Hi everybody.

I am wondering if anybody knows where I can get here in the US some Positive Pre-Sensitized PC Board to make prototypes with the Bromograph.
I am looking for like sheets that are at least A4 format.

I am looking around but prices of the things I found so far are a bit nuts ($20-25 each)

Thanks.

Odomus · 19th May 2010, 10:19 AM

http://www.jameco.com/webapp/wcs/sto...ategory=652010

or

www.jameco.com

Frankly this is where I get all my PCB's since I trust them and I never had a bad PCB, sen and non sens. I have had problems with other places that have sent me either half exposed and half sensitised boards, yes only half is coated... explain that to me.
As well as just cruddy boards period.

You can get the etching solutions and such there as well, and it is just a good allaround place to go for DIY people peiod.

Have fun and good luck.

12th May 2010, 10:26 PM	#1
Stefanoo diyAudio Member Join Date: Apr 2006 Location: italia - ora USA -WI	Copper Clad Presensitized Boards Hi everybody. I am wondering if anybody knows where I can get here in the US some Positive Pre-Sensitized PC Board to make prototypes with the Bromograph. I am looking for like sheets that are at least A4 format. I am looking around but prices of the things I found so far are a bit nuts ($20-25 each) Thanks. __________________ Stefano

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hardwired X/O components on Cu-Clad PCB	clm811	Multi-Way	4	31st July 2008 01:00 AM
Copper heatsink tweak - Thermaltake Copper Heatsinks	Ruach	Digital Source	16	23rd September 2006 10:59 PM
double sided copper clad	rv1890	Parts	3	19th February 2006 11:30 PM
DIY own copper tracks on blank boards	chris ma	Everything Else	10	1st April 2004 08:33 PM
Large Sheets Of Copper Clad Board.	bigparsnip	Swap Meet	0	9th July 2003 12:21 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th May 2010, 10:19 AM	#2
Odomus diyAudio Member Join Date: May 2010 Location: Suprise, AZ	http://www.jameco.com/webapp/wcs/sto...ategory=652010 or www.jameco.com Frankly this is where I get all my PCB's since I trust them and I never had a bad PCB, sen and non sens. I have had problems with other places that have sent me either half exposed and half sensitised boards, yes only half is coated... explain that to me. As well as just cruddy boards period. You can get the etching solutions and such there as well, and it is just a good allaround place to go for DIY people peiod. Have fun and good luck.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)