|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
23rd March 2010, 08:59 AM
|
#1 |
|
diyAudio Member
Join Date: Oct 2009
|
Turntable motor wanted
I have broken motor on Beogram tangental.
It says FG- SERVO MMX-4H2RPB DO anyone know who is manufacturer, possible other players using same motor, what could be used as donoter? Any suggestions for replacement? |
|
|
24th March 2010, 09:16 PM
|
#2 |
|
diyAudio Member
Join Date: Jul 2005
Location: D-55629 Schwarzerden
|
The logo comes either from the brand Matsushita or Mitsubishi (see attachement) - both companies do no longer offer such brushed dc motors.
Ask by follow brands for a cross reference list and currently produced replacement type for your above showed model: List2 : Motor Models for Typical Applications | MABUCHI MOTOR MITSUMI - PRODUCTS - PRODUCTS INDEX If you haven't success, ask additional by B&O for a data sheet copy from the origin brand and send it to Mabuchi or Mitsumi - then there one employer find out a suited replacement for you and you can order it by digchip or Farnell. The most critical values are the mechanical size (outer diameter and screw hole management) and the RPM value so as the direction (CW or CCW). Last edited by tiefbassuebertr; 24th March 2010 at 09:19 PM. |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Compact Disc Motor and Turntable - Advices for Replace and Motor Service wanted | tiefbassuebertr | Digital Source | 5 | 2nd August 2010 09:19 AM |
| Help required for using a FDD motor as a turntable motor. | binspaul | Analogue Source | 5 | 13th May 2009 03:59 AM |
| wanted turntable motor | yildiray35 | Swap Meet | 1 | 10th July 2008 11:14 AM |
| turntable motor noise! | rasp | Vendor's Bazaar | 0 | 4th February 2008 05:24 PM |
| Motor for turntable. | Tomek | Analogue Source | 33 | 9th October 2003 11:29 PM |
| New To Site? | Need Help? |
| Page generated in 0.07921 seconds (73.07% PHP - 26.93% MySQL) with 11 queries |
