|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
3rd January 2010, 04:44 PM
|
#1 |
|
diyAudio Member
Join Date: Dec 2009
|
Stabistors
I have a Harmon/Kardon Citation 17. It uses stabistors in the output section. The one is connected to the base of a transitor to the +24v line. The voltage on the base is 23v. The other is is being used in the bias section. one end of the stabistor is .58v and the other end is -.75v. One end is connected to a collector of the predriver and the other end to the collector of the other predriver. The symbol shown is two diodes in series. Part numbers are 41624214 and 41634702. Can I sub them with something else? Just use resistors or simply do not use them? I hope I uploaded the schematic properly.
untitled1.jpg |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
| New To Site? | Need Help? |
| Page generated in 0.05821 seconds (68.33% PHP - 31.67% MySQL) with 10 queries |
