Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

New builder: Proposed BOM
New builder: Proposed BOM
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 31st December 2009, 02:41 PM   #1
joekraska is offline joekraska  United States
diyAudio Member
Join Date: Dec 2009
Default New builder: Proposed BOM

I am currently considering building an AMP from Class D's kits. I have built PC's many times, and wired home electrical panels, but have only rudimentary EE knowledge. However, I do think I have the gist of what's required. As a begin to put it all together, I'll likely get extremely frustrated if I forget things, so I wanted to make sure that I've covered all the major elements in advance. Here is what I believe a minimum BOM to be:

  • AMP board.
  • Toroidal transformer, rated to produce watts at XX% of amplifer's rated output.
  • Power supply module.
  • Power switch of choice.
  • IEC connector for power.
  • Mainline fuse rated at XX amps.
  • CL60 thermistor inserted between signal equipment and ground.
  • Front panel volume dial of choice.
  • Rod to connect volume dial to potentiometer.
  • Potentiometer for volume control (is this inserted on the low level line in?)
  • Fans, if desired, and possibly a resistor inline to the fan to slow its speed, to make it quiet.
  • Case of choice.
  • Case feet of choice.
  • Possibly grounded metal partitioning to elecromagnetically isolate the power supply from the amp board.
  • Tools, elbow grease and luck.
Am I missing anything?
  Reply With Quote


New builder: Proposed BOMHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
B1 Buffer Preamp BOM davidfmartin Pass Labs 1 12th December 2011 10:27 PM
New builder: Proposed BOM joekraska Class D 1 31st December 2009 05:06 AM
BOM needed for Mark Kelly controller exurbia Analogue Source 4 4th October 2009 02:01 PM
wanted :100W Aleph X (kari's board) bom/parts list dhole Pass Labs 32 19th March 2006 11:27 AM

New To Site? Need Help?

All times are GMT. The time now is 12:51 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio