Trying to source: MKT 76 capacitor

Tusktek · 25th November 2009, 03:56 AM

I was referred over to this site from DIYMobileaudio. I'm trying to find somewhere when I can find the following capacitor. Mouser and Digikey both show no stock as well as MCM. This is a portion of an MB Quart QXD xover.

EL MKT 76
12u J 100V

Any help is appreciated.

mjf · 25th November 2009, 09:19 PM

hello.
why do you need this cap?
you can parallel a 2,2uf with a 10uf mkt.......so you get 12,2uf.
greetings

Tusktek · 26th November 2009, 03:31 AM

I was working an a set of automotive xovers. I tried to remove a cover not realizing that it was glued onto the top of the resistor. I managed to break the leads off at the base.

They're kind of a special set (though I don't use the xovers) and I'd just like to have them back together.

Enzo · 28th November 2009, 04:21 AM

Parts Express usually has a pretty good selection of crossover parts, for example:

Parts-Express.com:*Dayton DMPC-12 12uF 250V Polypropylene Capacitor | polypropylene capacitor polypropylene PAC PA loudspeaker lens dayton capacitor caps cap

That should work electrically. WOuld it fit physically? Dimensions are 22x56mm.

Tusktek · 28th November 2009, 01:25 PM

Thanks for looking. It's just too big.

Tusktek · 3rd December 2009, 02:37 AM

bump

25th November 2009, 03:56 AM	#1
Tusktek diyAudio Member Join Date: Nov 2009	Trying to source: MKT 76 capacitor I was referred over to this site from DIYMobileaudio. I'm trying to find somewhere when I can find the following capacitor. Mouser and Digikey both show no stock as well as MCM. This is a portion of an MB Quart QXD xover. EL MKT 76 12u J 100V Any help is appreciated.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
electrolytic capacitor source	oldheathkitphil	Parts	2	22nd June 2007 08:25 PM
Audio Research Dual 75 Capacitor Source?	neddyboy	Tubes / Valves	7	6th April 2007 07:27 PM
bypass capacitor source	omni	Parts	1	16th July 2006 09:28 PM
need a source for capacitor clamps	homemade	Parts	1	24th March 2006 03:15 AM
Source for 1000uF/50V capacitor	Rafal	Chip Amps	13	19th February 2004 07:05 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th November 2009, 09:19 PM	#2
mjf diyAudio Member Join Date: Jan 2009 Location: upper austria/near linz	hello. why do you need this cap? you can parallel a 2,2uf with a 10uf mkt.......so you get 12,2uf. greetings

26th November 2009, 03:31 AM	#3
Tusktek diyAudio Member Join Date: Nov 2009	I was working an a set of automotive xovers. I tried to remove a cover not realizing that it was glued onto the top of the resistor. I managed to break the leads off at the base. They're kind of a special set (though I don't use the xovers) and I'd just like to have them back together.

28th November 2009, 04:21 AM	#4
Enzo diyAudio Member Join Date: Sep 2004 Location: Lansing, Michigan	Parts Express usually has a pretty good selection of crossover parts, for example: Parts-Express.com:*Dayton DMPC-12 12uF 250V Polypropylene Capacitor \| polypropylene capacitor polypropylene PAC PA loudspeaker lens dayton capacitor caps cap That should work electrically. WOuld it fit physically? Dimensions are 22x56mm.

28th November 2009, 01:25 PM	#5
Tusktek diyAudio Member Join Date: Nov 2009	Thanks for looking. It's just too big.

3rd December 2009, 02:37 AM	#6
Tusktek diyAudio Member Join Date: Nov 2009	bump

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)