I was working an a set of automotive xovers. I tried to remove a cover not realizing that it was glued onto the top of the resistor. I managed to break the leads off at the base.
They're kind of a special set (though I don't use the xovers) and I'd just like to have them back together.
They're kind of a special set (though I don't use the xovers) and I'd just like to have them back together.
Parts Express usually has a pretty good selection of crossover parts, for example:
Parts-Express.com: Dayton DMPC-12 12uF 250V Polypropylene Capacitor | polypropylene capacitor polypropylene PAC PA loudspeaker lens dayton capacitor caps cap
That should work electrically. WOuld it fit physically? Dimensions are 22x56mm.
Parts-Express.com: Dayton DMPC-12 12uF 250V Polypropylene Capacitor | polypropylene capacitor polypropylene PAC PA loudspeaker lens dayton capacitor caps cap
That should work electrically. WOuld it fit physically? Dimensions are 22x56mm.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.