4X2 RCA Connectors PCB Mount

TLS · 21st October 2009, 11:58 PM

I am looking for a RCA connector that has 8 contacts on it. Like you would find on the back of a 7.1 analog out Bluray player. Anyone have a source? I have tried the usual, Mouser, Digikey, Farnell

It would be used on something like this, see the LHS:
http://www.oppodigital.com/blu-ray-b...83_back_hr.jpg

CBRworm · 22nd October 2009, 01:09 AM

This probably doesn't help you, but I have scavenged them from other equipment.

Otherwise get 4 2 connector ones.

Enzo · 22nd October 2009, 04:40 AM

You will probably have to find it on some other product and scavenge it, or get REAL lucky. Or invent something. Those manufacturers get such connectors made to their spec for their boards, they don;t usually buy them off the shelf.

JensH · 24th October 2009, 08:14 PM

Try to take a look at Kunming Electronics Co. They have what you are looking for and a lot more. Whether they are willing to deliver small quantities I don't know. I have done some business with them some years ago (professionally). As far as I remember I was able to buy some samples (prepaid) before buying for mass production. The quality of their products is excellent. If you look at their customer list you will find that it is rather impressive too.

Enzo · 27th October 2009, 03:56 AM

The problem is finding them with the same footprint.

Lee35210 · 29th October 2009, 04:50 PM

Hard wire individual jacks would be simplest solution

coloradosound · 29th October 2009, 05:02 PM

Do you intend to solder to PCB/wire? Horizontal / Vertical? (Straight or 90 degree)

TLS · 19th November 2009, 12:41 AM

I am still looking for a good solution, I need a PCB mount right angle dual vertical RCA set. They need to be spaced on 14mm x 14mm centers. I found some at Digikey and thought I could combine 4 sets of two to make the eight outputs but they end up being spaced farther than 14mm apart. I have found a few offshore companies but no one replies.

21st October 2009, 11:58 PM	#1
TLS diyAudio Member Join Date: Mar 2008	4X2 RCA Connectors PCB Mount I am looking for a RCA connector that has 8 contacts on it. Like you would find on the back of a 7.1 analog out Bluray player. Anyone have a source? I have tried the usual, Mouser, Digikey, Farnell It would be used on something like this, see the LHS: http://www.oppodigital.com/blu-ray-b...83_back_hr.jpg

29th October 2009, 04:50 PM	#6
Lee35210 diyAudio Member Join Date: Jan 2004 Location: Irondale, AL	Hard wire individual jacks would be simplest solution __________________ Been there, Heard that, Forgot what I was listening to!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pc mount phono connectors - bnc footprint	danville	Parts	3	13th January 2009 11:43 PM
CMC connectors	jarthel	Parts	8	10th July 2007 02:20 AM
WT: OPA2604 Surface Mount 2x - Will trade DIP mount 2x	Destroyer OS.	Swap Meet	1	22nd December 2006 06:18 AM
WBT connectors	Freddie	Parts	6	25th November 2006 07:50 PM
BNC Connectors	Noak	Parts	2	30th May 2006 04:18 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd October 2009, 01:09 AM	#2
CBRworm diyAudio Member Join Date: Jan 2007 Location: S. Florida	This probably doesn't help you, but I have scavenged them from other equipment. Otherwise get 4 2 connector ones.

22nd October 2009, 04:40 AM	#3
Enzo diyAudio Member Join Date: Sep 2004 Location: Lansing, Michigan	You will probably have to find it on some other product and scavenge it, or get REAL lucky. Or invent something. Those manufacturers get such connectors made to their spec for their boards, they don;t usually buy them off the shelf.

24th October 2009, 08:14 PM	#4
JensH diyAudio Member Join Date: Jul 2009	Try to take a look at Kunming Electronics Co. They have what you are looking for and a lot more. Whether they are willing to deliver small quantities I don't know. I have done some business with them some years ago (professionally). As far as I remember I was able to buy some samples (prepaid) before buying for mass production. The quality of their products is excellent. If you look at their customer list you will find that it is rather impressive too.

27th October 2009, 03:56 AM	#5
Enzo diyAudio Member Join Date: Sep 2004 Location: Lansing, Michigan	The problem is finding them with the same footprint.

29th October 2009, 05:02 PM	#7
coloradosound diyAudio Member Join Date: Nov 2005 Location: colorado	Do you intend to solder to PCB/wire? Horizontal / Vertical? (Straight or 90 degree)

19th November 2009, 12:41 AM	#8
TLS diyAudio Member Join Date: Mar 2008	I am still looking for a good solution, I need a PCB mount right angle dual vertical RCA set. They need to be spaced on 14mm x 14mm centers. I found some at Digikey and thought I could combine 4 sets of two to make the eight outputs but they end up being spaced farther than 14mm apart. I have found a few offshore companies but no one replies.