Reliable Magnet Vendor

feyrerm · 18th October 2009, 05:20 AM

I am designing a ribbon tweeter and need a reliable source of good strong magnets. Any help would be greatly appreciated.

Thanks,

Mike

woody · 18th October 2009, 09:47 AM

You might try ebay. Do you have a design for your tweeter yet.

feyrerm · 18th October 2009, 02:32 PM

I am looking to use a design similar to this.

"The tall neodymium ribbon". Part 1

Only shorter thinner ribbon and a thinner gap.

dave_gerecke · 18th October 2009, 06:08 PM

I haven't worked with this company, but they seem like they are stable. They have been around since 1980. And they have a surplus area besides their information about their regular business.

Permanent Magnet Products - Stanford Magnets

Peace,

Dave

Conrad Hoffman · 18th October 2009, 06:14 PM

There are quite a few- I think these guys are all good:

SuperMagnetMan Magnets

Neodymium Magnets : United Nuclear , Scientific Equipment & Supplies

K&J Magnetics - Uses for Neodymium Rare Earth Magnets

feyrerm · 19th October 2009, 03:05 AM

Thanks a bunch!

sq225917 · 22nd October 2009, 05:06 PM

George Mizzel, supermagnetman is great, a real gent...

18th October 2009, 05:20 AM	#1
feyrerm diyAudio Member Join Date: Oct 2009	Reliable Magnet Vendor I am designing a ribbon tweeter and need a reliable source of good strong magnets. Any help would be greatly appreciated. Thanks, Mike

18th October 2009, 06:14 PM	#5
Conrad Hoffman diyAudio Member Join Date: Mar 2007 Location: Canandaigua, NY USA	There are quite a few- I think these guys are all good: SuperMagnetMan Magnets Neodymium Magnets : United Nuclear , Scientific Equipment & Supplies K&J Magnetics - Uses for Neodymium Rare Earth Magnets __________________ I used to be an audiophool like you but then I took an arrow to the knee.

22nd October 2009, 05:06 PM	#7
sq225917 diyAudio Member Join Date: Jun 2004 Location: sheffield	George Mizzel, supermagnetman is great, a real gent... __________________ hoping to pick up some things.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
magnet design 101 - saturate iron with a ferrite magnet?	capslock	Multi-Way	18	28th April 2010 04:51 AM
Box-tuning magnet-to-magnet construction	Mr_Oasis	Full Range	21	2nd June 2009 12:51 AM
www.thetubecenter.com = reliable?	skyraider	Tubes / Valves	4	22nd June 2008 12:49 AM
Reliable B+ PSU for pro preamp	rotation	Tubes / Valves	1	30th November 2007 03:14 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th October 2009, 09:47 AM	#2
woody diyAudio Member Join Date: Jan 2002 Location: Tyrone Ga. U.S.A.	You might try ebay. Do you have a design for your tweeter yet.

18th October 2009, 02:32 PM	#3
feyrerm diyAudio Member Join Date: Oct 2009	I am looking to use a design similar to this. "The tall neodymium ribbon". Part 1 Only shorter thinner ribbon and a thinner gap.

18th October 2009, 06:08 PM	#4
dave_gerecke diyAudio Member Join Date: Dec 2007 Location: Vermont	I haven't worked with this company, but they seem like they are stable. They have been around since 1980. And they have a surplus area besides their information about their regular business. Permanent Magnet Products - Stanford Magnets Peace, Dave

19th October 2009, 03:05 AM	#6
feyrerm diyAudio Member Join Date: Oct 2009	Thanks a bunch!

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read