Need toroid slim - max 39mm

rotebailer · 24th July 2009, 09:34 AM

Hello,

I am in search of a 160VA toroid with up to 39mm in height.
Secondaries should be 25-0-25.
Can anyone chime in with suppliers in Europe?
Thank you
Filipe

h_a · 27th July 2009, 02:09 PM

Consider having one custom made for you, it's not so expensive and you can choose a lot of options (like a magnetic shield).

Just try to google a few manufacturers in your country and mail a few for an offer. Not all of them care much about 1 piece orders though.

Have fun, Hannes

Nisbeth · 28th July 2009, 09:25 AM

I've used www.toroidy.pl for customs with good results. Send Tomasz an email and ask about prices etc.

/U.

PigletsDad · 28th July 2009, 09:33 AM

Could you use two 80VA parts side by side? If so, part number 422-5281 from RS would do the job, it is 38mm tall. See http://uk.rs-online.com/web/search/s...duct&R=4225281

24th July 2009, 09:34 AM	#1
rotebailer diyAudio Member Join Date: May 2006	Need toroid slim - max 39mm Hello, I am in search of a 160VA toroid with up to 39mm in height. Secondaries should be 25-0-25. Can anyone chime in with suppliers in Europe? Thank you Filipe

27th July 2009, 02:09 PM	#2
h_a diyAudio Member Join Date: Sep 2006 Location: Graz, Austria	Consider having one custom made for you, it's not so expensive and you can choose a lot of options (like a magnetic shield). Just try to google a few manufacturers in your country and mail a few for an offer. Not all of them care much about 1 piece orders though. Have fun, Hannes __________________ fresh matched IRFP240/IRFP9240 fets \|\| AlephJ/JX-kits F5 transistor kits \|\| Burning Amp BA-1/2/3 transistor kits

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Toroid transformer slim	jalejos	Power Supplies	1	7th June 2009 08:01 AM
Is there any hope for a driver with a rubbing 39mm voice coil?	kappa546	Multi-Way	10	7th May 2009 09:38 PM
Trade a 40V 400VA Toroid for 20V 300VA Toroid	john65b	Swap Meet	7	10th October 2006 03:49 AM
Aura NS3 or NS4 for slim MTM setup?	silvercans	Multi-Way	2	2nd December 2005 09:12 PM
slim,cheap,mcm tower	ttvonau	Multi-Way	15	2nd July 2003 10:24 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

28th July 2009, 09:25 AM	#3
Nisbeth diyAudio Member Join Date: Jan 2001 Location: Denmark	I've used www.toroidy.pl for customs with good results. Send Tomasz an email and ask about prices etc. /U.

28th July 2009, 09:33 AM	#4
PigletsDad diyAudio Member Join Date: Jul 2007 Location: South Worcestershire	Could you use two 80VA parts side by side? If so, part number 422-5281 from RS would do the job, it is 38mm tall. See http://uk.rs-online.com/web/search/s...duct&R=4225281

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)