diyAudio (
-   Parts (
-   -   Twisted Pear Connectors (

marc brown 23rd March 2009 01:49 AM

Twisted Pear Connectors
2 Attachment(s)
I purchased a used Darwin and need to source some connectors. I wrote the guys at Twisted Pear but haven't heard back.

Does anyone know who makes these three-pin connectors?


okapi 23rd March 2009 02:07 AM


i think they used to have a parts list for this device but i see that they don't have one presently.

you might get a quicker response if you post directly in one of their threads.

they are usually very responsive.

my guess is that they might be molex but that is just a guess.

454Casull 23rd March 2009 02:12 AM

Molex probably does, but they've got so many in their catalogue it's tough to find out what they are, exactly. Might help to measure the pin thickness and spacing with a vernier caliper if you end up not getting a response.

Andrew.Thompson 23rd March 2009 01:50 PM

They look like 0.1" Molex KK connectors to me, if you're after the plug housing you should be able to use the part below from mouser and you'll need some crimp pins to go with them as well.

marc brown 23rd March 2009 02:11 PM

Thanks Andrew.

I'm having a devil of a time matching these things. I'll take a look at the KK's. :)

The pitch on the pins is around 0.1" or 2.5mm.

marc brown 23rd March 2009 02:19 PM

Thanks Andrew! You are exactly right. These are the guys in question:

All times are GMT. The time now is 05:42 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio