Hello,Recaping my sansui 1000a tube reciever.One of the big caps is 20/20/20uf@500v. Not cheep or easy to find.I want to replace it with 3caps, 22uf @ 450v each. would this work? or will the slightly less voltage rating give me a problem? thanks, tom
Before recaping check what the real voltage is, anything over 440 and the 500V is needed. Be careful measuring at this voltage , best to attach the meter probes then set the meter and turn on. read the meter and turn off. Wait for the caps to discharge before removing the probes.
, best to attach the meter probes then set the meter and turn on. read the meter and turn off. Wait for the caps to discharge before removing the probes.