Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

Black Gate N or Polyester
Black Gate N or Polyester
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 15th April 2003, 09:22 PM   #1
Whit is offline Whit  United States
diyAudio Member
Join Date: Mar 2003
Location: USA
Default Black Gate N or Polyester

I need a PS decoupling cap that is physically small 10x12mm but fairly large in value(3.3uf or more). I've found that Roederstein makes a 3.3uf MKT cap but I was wondering how this would compare to a 10uf Black Gate N cap sonically? Thanks.

  Reply With Quote
Old 16th April 2003, 08:02 PM   #2
EchoWars is offline EchoWars  United States
diyAudio Member
EchoWars's Avatar
Join Date: Dec 2002
Location: Left of the Dial
This is personal opinion and should be taken as such...

The 'N' series is, of course, non-polar. If you are using it for PS bypass/decoupling, why the more expensive cap? Use a BG 'C' or 'Standard' to get the job done.

If you really need a cap that large, and are hurting for space, then your choices are pretty limited. I'd take a good film cap over a BG any day, but sometimes there is no other way to get the job done.
  Reply With Quote


Black Gate N or PolyesterHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: 4x 100uF 50v Black gate N folkeb Swap Meet 0 12th December 2008 11:36 AM
WTB:Black Gate Caps Fast996 Swap Meet 2 11th November 2008 05:45 AM
What is the correct Black Gate value to use? dom letor Parts 4 8th July 2003 06:28 AM

New To Site? Need Help?

All times are GMT. The time now is 08:30 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio