diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Parts (http://www.diyaudio.com/forums/parts/)
-   -   DIY output transformer (http://www.diyaudio.com/forums/parts/136591-diy-output-transformer.html)

Brit01 15th January 2009 11:34 AM

DIY output transformer
 
I'm interested in building an output transformer. Push-Pull/UL taps/8/4 ohms outputs etc. 30Hz-45kHz frequency range maybe. 50 watts or so. for hi-fi.

Not sure on the tubes and design yet. Just investigating into the possibility of a DIY job.

I found this german site that seems to sell all the parts.

But the site is overwhelming and not easy to follow if you don't know what you are looking for especially as most of it is in German.

Looking for the E and I Laminations and winding core.

Has anyone had experience of purchasing from this store or any other recommendations?

Also any good tutorials of how to make these?

http://www.spulen.com/



http://www.geofex.com/Article_Folders/xformer_des/xformer.htm


All times are GMT. The time now is 08:29 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Wiki