pc mount phono connectors - bnc footprint - diyAudio
Go Back   Home > Forums > Design & Build > Parts

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 12th January 2009, 11:45 PM   #1
diyAudio Member
 
Join Date: Jun 2004
Location: Minnesota
Default pc mount phono connectors - bnc footprint

I have a few samples of a very nice phono connector that has the same footprint as a typical pc mount BNC.

I got a few samples originally from A/D Electronics (before they went out of business) and the package called them Tiffany RCA.

I also had a datasheet with detailed dimensions. It had a part number that I was able to google to find the actual manufacturer in the far east. Unfortunately, I can't find this datasheet. I did find a very similar part from First Tech Electronics P/N CN-RJ-012G. The sample I saw is mechanically equivalent but not quite as nice.

I am looking for a low cost Asian supplier since my requirements are in the 100-1000s.

Can anyone point me to a source?

Thanks

Al
  Reply With Quote
Old 13th January 2009, 12:50 AM   #2
diyAudio Member
 
Join Date: Sep 2007
Location: N38
I really like Ling Sing # PMP201 (rt angle) & PMP202 (straight). They are excellent quality.

http://www.lingsing.com.tw/s-1.htm

- Richard
  Reply With Quote
Old 13th January 2009, 03:52 AM   #3
diyAudio Member
 
Join Date: Jun 2004
Location: Minnesota
These are exactly lke the type I was referring to. Did you buy these direct from this supplier. What were their minimums?

Thx

Al
  Reply With Quote
Old 13th January 2009, 11:43 PM   #4
diyAudio Member
 
Join Date: Sep 2007
Location: N38
I don't recall their minimums, I tried to spec these for the ZR4630, Multi-zone receiver, about 8 years ago. My employer decided to use another custom part instead.
Attached Images
File Type: jpg zr-4630.jpg (92.0 KB, 124 views)
  Reply With Quote
Old 3rd July 2013, 08:53 PM   #5
diyAudio Member
 
Join Date: Jun 2004
Location: Minnesota
Several years ago I started this thread. I still have not had too much success.

It has a BNC style footprint. Looks like this:

bnc2.jpg

I need about 1000 so I am looking for an original manufacturer probably from Asia that deal in OEM quantities.

Thanks

Last edited by danville; 3rd July 2013 at 09:05 PM.
  Reply With Quote
Old 6th July 2013, 12:53 AM   #6
diyAudio Member
 
Speedskater's Avatar
 
Join Date: Sep 2002
Location: Lakewood, Ohio
It was a bad idea then and it's still a bad idea. RCA's should be mounted on the chassis/enclosure.

That old Pin #1 problem also applies to unbalance connectors.
__________________
Kevin

Last edited by Speedskater; 6th July 2013 at 01:03 AM. Reason: added content
  Reply With Quote
Old 6th July 2013, 03:43 PM   #7
diyAudio Member
 
Join Date: Nov 2008
Pin1 on a XLR is not a signal carrying wire, ground on a RCA is, so this analogy is flawed. E
  Reply With Quote
Old 7th July 2013, 05:27 AM   #8
Calvin is offline Calvin  Germany
diyAudio Member
 
Calvin's Avatar
 
Join Date: Nov 2004
Location: close to Basel
Hi,

You can find the jacks of #5 at AEC Connectors Co.LTD Taiwan.
Item RJ-255PLG-TEF-M
Similar, but with metal body: RJ-203GG-TEF

jauu
Calvin
  Reply With Quote
Old 7th July 2013, 06:34 AM   #9
Gricko is offline Gricko  Croatia
diyAudio Member
 
Join Date: Apr 2009
Location: Zagreb
High-End Connectors, Audio Connector Manufacturer - Aec Connectors Co., Ltd.
  Reply With Quote
Old 7th July 2013, 04:59 PM   #10
diyAudio Member
 
Join Date: Dec 2005
Location: Kuala Lumpur
As usual, no mention about how the shield pins are connected to the body. Too often you get all manner of fancy materials and then spoil it with pressure contacts.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Who make these RCA/Phono connectors Jan Dupont Parts 3 11th April 2009 04:30 AM
LM3875 PCB Footprint Doovieman Chip Amps 1 9th June 2004 07:39 AM
LM4780 Footprint.. Paprika Chip Amps 2 12th April 2004 07:17 PM
OPA549 footprint for ExpressPCB sobazz Chip Amps 1 31st March 2004 03:07 PM
Orange phono sockets (PCB-mount) jimbo69 Parts 0 9th February 2004 02:17 PM


New To Site? Need Help?

All times are GMT. The time now is 12:51 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2