Nichicon KS in amp power supply

jims · 1st January 2009, 04:35 PM

Hi

Anyone tried the Nichicon KS series capacitors? They look good on paper.

thanks

JimS

jims · 2nd January 2009, 12:16 PM

Guess not. Any interest in a GB to try them (Digikey lists them in lots of 200 hundred)?

JimS

ClaveFremen · 2nd January 2009, 02:06 PM

I've just buyed 4 10000uF 50V from mouser for using it in MyRef.

I think in February (!) I could try them against CDE in kit and Pana TS-UP.

pooge · 2nd January 2009, 09:56 PM

Also wondering about the KW series, and whether they have steel leads like the new FW that replaced the FX

ClaveFremen · 3rd January 2009, 01:34 AM

Buyed some 220uf 50V Muse KW too...

they must arrive middle January but until MyRef Kits arrives too, no tests!

When they arrive I'll put a magnet around them

KBK · 3rd January 2009, 09:30 PM

don't forget to add the results to the 'non-magnetic' list.

1st January 2009, 04:35 PM	#1
jims diyAudio Member Join Date: Mar 2007	Nichicon KS in amp power supply Hi Anyone tried the Nichicon KS series capacitors? They look good on paper. thanks JimS

2nd January 2009, 02:06 PM	#3
ClaveFremen diyAudio Member Join Date: May 2005 Location: Milan, Italy	I've just buyed 4 10000uF 50V from mouser for using it in MyRef. I think in February (!) I could try them against CDE in kit and Pana TS-UP. __________________ Dario ClaveFremen "Bailando Salsa en el Sietch"

3rd January 2009, 01:34 AM	#5
ClaveFremen diyAudio Member Join Date: May 2005 Location: Milan, Italy	Buyed some 220uf 50V Muse KW too... they must arrive middle January but until MyRef Kits arrives too, no tests! When they arrive I'll put a magnet around them __________________ Dario ClaveFremen "Bailando Salsa en el Sietch"

3rd January 2009, 09:30 PM	#6
KBK diyAudio Member Join Date: Dec 2003 Location: The Wilds Of Canada	don't forget to add the results to the 'non-magnetic' list. __________________ "Never forget that only dead fish swim with the stream." -- Malcolm Muggeridge. "Truth cannot be brought down, rather the individual must make the effort to ascend to it." -- Jiddu Krishnamurti

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd January 2009, 12:16 PM	#2
jims diyAudio Member Join Date: Mar 2007	Guess not. Any interest in a GB to try them (Digikey lists them in lots of 200 hundred)? JimS

2nd January 2009, 09:56 PM	#4
pooge diyAudio Member Join Date: May 2003 Location: Northern Va.	Also wondering about the KW series, and whether they have steel leads like the new FW that replaced the FX

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Split Voltage Switching Power Supply for Power Amp	vectorplane	Swap Meet	2	24th April 2011 12:48 AM
LTspice tool for power amp power supply component evaluation	andy_c	Software Tools	2	23rd August 2009 06:10 PM
Parallel a dual power supply or two power supplies?	Thunau	Power Supplies	12	16th February 2007 05:21 AM
selling high current power supply for power amps.	ericpeters	Swap Meet	0	14th January 2005 03:21 PM
heater supply (xformer specs are 6.3V 2.5A) as supply for a power LED?	jarthel	Tubes / Valves	10	21st July 2003 02:30 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read