|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
23rd December 2008, 11:31 AM
|
#1 |
|
diyAudio Member
Join Date: Dec 2008
|
Need Pots For Alesis NanoCompressor
Hi guys. I have an older Alesis NanoCompressor which has worked fine until one of our cats jumped up on the keyboard and knocked it to the floor. Unfortunately the 2 right side pots were severely bent and made the controls very hard to turn. It was out of warranty, so I took it apart and unsolderd the 2 pots. I have been to Frys, Radio Shack and other parts stores and can't find the exact pots.
The pots have embossed codes or numbers on the back side. Also, is there anyway to get service manuals from Alesis or elsewhere? Would any generic pot work the same size? Any advice and help is vastly appreciated Thanks for your response katt |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problems with Alesis RA-500 | sippo | Solid State | 11 | 15th January 2013 08:00 PM |
| Alesis RA 150 - Good or Bad?? | Brit01 | Solid State | 5 | 24th July 2008 10:52 AM |
| Alesis LCD | goodlife | Parts | 1 | 24th September 2005 07:24 AM |
| Alps pots vs. TKD pots? TKD worth the extra$$? | G | Tubes / Valves | 11 | 17th August 2004 04:33 AM |
| any one know if the Alesis RA 300 amp can be mod ? | zuka | Solid State | 2 | 14th April 2003 05:58 AM |
| New To Site? | Need Help? |
